C175 Generator Sets Caterpillar


After Starting Engine

Usage:

C175-20 BXR
注: 发动机安装或修复后,请仔细检测发动机,发现性能有无异常。

接合被驱动设备

  1. 确保仪表组处于具体发动机转速下的正常范围。

  2. 进行另一次绕机检查。 检查发动机是否有液体和气体渗漏。

  3. 施加负载。 开始时在低负载运行发动机。

    当发动机运行在额定转速和低功率需求时,达到正常工作温度的时间要快些。 此程序比发动机无负载怠速运转的情况要更有效率。 发动机应在数分钟内达到工作温度。

  4. 温度表开始升温之后,发动机可以在满负载下运行。

  5. 持续检查仪表组和被驱动设备。

Caterpillar Information System:

C9 Petroleum Engines Cylinder Head - Install
Caterpillar Machine Fluids Recommendations Distillate Diesel Fuel
G3600 Engines Prelubrication - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Display of Voltage or Current or Power Is Inaccurate
C9 Petroleum Engines Cylinder Head - Remove
2007/12/03 Improved Wiring for the Speed Control for the Electronic Governor {1408, 1417}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Troubleshooting Diagnostic Codes
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224} Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
C9 Petroleum Engines Rocker Arm and Shaft - Install
320D and 323D Excavators Hydraulic System Swing Drive
G3600 Engines Fuel Control - Test
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Fasteners
C9 Petroleum Engines Engine Oil Pan - Remove and Install
G3500B Engines Prelubrication Pump Problem
G3600 Engines Air Starting Motor Problem
G3600 Engines Starting - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicators of Alarm Module or Remote Annunciator Are Constantly Flashing
C175 Generator Sets Fuel Related Components in Cold Weather
2008/01/07 A New O-ring for the Injector Sleeve is Now Used {1100}
2008/01/01 A New O-ring for the Injector Sleeve is Now Used {1100}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0111 - FMI 03
2011/02/11 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/01 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.