2007/12/03 Caterpillar


Improved PL1000T Hardware and Software is Now Available {7610}

Usage:

SR4B 1BN
Electric Power Generation:
  • All
    Engine: Industrial, Marine, and Generator Set that Use Flash Programming
  • All
  • Engine News SEBD9520, 26 November 2007, "Improved PL1000T Hardware and Software is Now Available {7610}". Disregard the above referenced article. Refer to the following information.

    ReferenceSystems Operations, Troubleshooting, Testing & Adjusting, RENR7945

    ReferenceSpecial Instructions, REHS2125

    ReferenceElectronic Media CD, EERP1000

    256-7511(v4) Communication Electronic Control Module Enhancements

    The 256-7511(v4) Communication Electronic Control Module has been released as a direct replacement for the existing 256-7511(v3) Communication Electronic Control Module. The 256-7511(v4) Communication Electronic Control Module provides the same form, fit and functionality of the 256-7511(v3) Communication Electronic Control Module with several enhancements.

    • Added functionality to flash over J1939 with 256-7512(v4) Communication Electronic Control Module

    • Increased Temperature Range

    • CSA Class 1 Div 2 certified

    • Rugged design with improved durability

    315-0628 Communication Software Group Enhancements

    315-0628 Communication Software Group has been released as a direct replacement for the existing 279-6664 Communication Software Group. The 315-0628 Communication Software Group provides the same functionality as the 279-6664 Communication Software Group with several enhancements.

    • Improved J1939 Bridge

    • Allows USB to Serial Adapters on ECA

    • Improved COM port communications

    Improved Documentation

    Systems Operations, Troubleshooting, Testing & Adjusting, RENR7945 provides information about the new PL1000T enhancements. This document has been updated and rearranged for better guidance.

    Special Instructions, REHS2125 provides information about PL1000T installation. This document has been updated and rearranged for better guidance.

    Caterpillar Information System:

    C3.3 Industrial Engine Model View Illustrations
    C4.4 Generator Set Engines Injector Data Incorrect - Test
    G3520B Industrial Engines Diagnostic Trouble Codes
    G3520B Industrial Engines Event Codes
    3176C, 3406E and 3456 Industrial Engines ECM Does Not Communicate with Other Modules
    3516B Engine for 994F and 994H Wheel Loaders Coolant Contains Oil
    2007/11/26 Improved PL1000E Hardware and Software is Now Available {7610}
    C9 Petroleum Engines Gear Group (Front) - Install
    C9 Petroleum Engines Gear Group (Front) - Remove
    Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Parallel Setpoint Viewing OP2-3
    C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
    C18 Petroleum Generator Sets Instrument Panel - Inspect
    C9 Petroleum Engines Housing (Front) - Remove
    TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Separate
    TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Connect
    C15 and C18 Petroleum Generator Sets Speed Sensor - Clean/Inspect
    C9 Petroleum Engines Housing (Front) - Install
    TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Remove
    TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Install
    TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Disassemble
    TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Assemble
    C4.4 Generator Set Engines Injector Solenoid Circuit - Test
    C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Install
    C9 Petroleum Engines Crankcase Breather - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.