2007/11/26 Caterpillar


Improved PL1000E Hardware and Software is Now Available {7610}

Usage:

SR4B 1BN
Electric Power Generation:
  • All
    Engine: Industrial, Marine, and Generator Set that Use Flash Programming
  • All
  • ReferenceSystems Operations, Troubleshooting, Testing & Adjusting, RENR8091

    ReferenceSpecial Instructions, REHS2362

    ReferenceElectronic Media CD, EERP1000

    256-7512(v4) Communication Electronic Control Module Enhancements

    The 256-7512(v4) Communication Electronic Control Module has been released as a direct replacement for the existing 256-7512(v3) Communication Electronic Control Module. The 256-7512(v4) Communication Electronic Control Module provides the same form, fit and functionality of the 256-7512(v3) Communication Electronic Control Module with several enhancements.

    • Added functionality RS-485 2-wire

    • Added functionality to flash over J1939

    • Increased Temperature Range

    • CSA Class 1 Div 2 certified

    • Rugged design with improved durability

    315-0627 Communication Software Group Enhancements

    315-0627 Communication Software Group has been released as a direct replacement for the existing 306-0378 Communication Software Group. The 315-0627 Communication Software Group provides the same functionality as the 306-0378 Communication Software Group with several enhancements.

    • Added functionality RS-485 2-wire with 256-7512(v4) Communication Electronic Control Module

    • Added functionality to flash over J1939 with 256-7512(v4) Communication Electronic Control Module

    • Increased the amount of allowable parameters in PCL File

    • Dual data link translations (J1939 to Modbus and CDL to Modbus)

    • Improved handling of Active Diagnostics

    • Allows USB to Serial Adapters on ECA

    • Improved Com Port Communications

    • Improved TCP Modbus Communication

    • Added functionality of Limted Modbus Master supported Cat ET information

    Improved Documentation

    Systems Operations, Troubleshooting, Testing & Adjusting, RENR8091 provides information about the new PL1000E enhancements. This document has been updated and rearranged for better guidance.

    Special Instructions, REHS2362 provides information about PL1000E installation. This document has been updated and rearranged for better guidance.

    Caterpillar Information System:

    C9 Petroleum Engines Gear Group (Front) - Install
    C9 Petroleum Engines Gear Group (Front) - Remove
    Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Parallel Setpoint Viewing OP2-3
    C27 and C32 Engines for Caterpillar Built Machines Valve Actuator (Variable) - Remove
    C18 Petroleum Generator Sets Instrument Panel - Inspect
    3176C, 3406E and 3456 Industrial Engines Diagnostic Code Cross Reference
    C9 Petroleum Engines Front Cover - Remove and Install
    3176C, 3406E and 3456 Industrial Engines Engine Overspeeds
    C4.4 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
    3176C, 3406E and 3456 Industrial Engines Coolant Level - Test
    C13, C15, and C18 Tier 4 Final Engines Air Lines
    3176C, 3406E and 3456 Industrial Engines Indicator Lamp - Test
    3516B Engine for 994F and 994H Wheel Loaders Coolant Contains Oil
    3176C, 3406E and 3456 Industrial Engines ECM Does Not Communicate with Other Modules
    G3520B Industrial Engines Event Codes
    G3520B Industrial Engines Diagnostic Trouble Codes
    C4.4 Generator Set Engines Injector Data Incorrect - Test
    C3.3 Industrial Engine Model View Illustrations
    2007/12/03 Improved PL1000T Hardware and Software is Now Available {7610}
    C9 Petroleum Engines Housing (Front) - Remove
    TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Separate
    TH55-E70 and TH55-E90 Petroleum Transmissions Transmission and Torque Converter - Connect
    C15 and C18 Petroleum Generator Sets Speed Sensor - Clean/Inspect
    C9 Petroleum Engines Housing (Front) - Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.