Heat Exchanger
Show/hide table
Illustration 1 | g00537934 |
Use the following procedure to tighten the bolts.
- Install guide studs in locations (9) and (10). Use three incremental steps to tighten the bolts. Tighten bolt (1) through bolt (8) .
Torque for bolts ... 175 ± 30 N·m (129 ± 22 lb ft)
- Remove the guide studs from locations (9) and (10) .
- Install the spacers in locations (9) and (10) .
- Install the rear bolts in locations (9) and (10) .
Torque for bolts ... 105 ± 20 N·m (77 ± 15 lb ft)
- Tighten the front bolts in locations (9) and (10) .
Torque for bolts ... 175 ± 30 N·m (129 ± 22 lb ft)
Show/hide table
Illustration 2 | g01431710 |
Front view of engine |
(11) Torque for two studs ... 65 ± 10 N·m (48 ± 7 lb ft)
(12) Lubricate the bore lightly with glycerin or an approved equivalent.
Caterpillar Information System:
2007/11/12 Use the Turbocharger Seal Kit to Repair Exhaust Leaks {1052, 1053, 7555}
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Disassemble
3176C, 3406E and 3456 Industrial Engines Data Link - Test
2007/11/19 A New Water Seal and a New Spacer are Used for the Water Pumps {1361, 1361}
G3600 Engines Sensor Supply - Test
3406E and C15 Marine Engines Engine Oil Pan
3406E and C15 Marine Engines Engine Oil Pan
C13 and C15 On-Highway Engines Configuration Parameters - Customer Specified Parameters
Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910} Procedure to Prevent or Correct Multi-Station Control System (MSCS) Throttle Issues{1901, 1915, 3065, 5910}
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Event Codes
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Air Shutoff - Test
G3600 Engines Sensor Signal (Analog, Passive) - Test
797F Off-Highway Truck Power Train Relief Valve (Transmission Lubrication) - Assemble
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Disassemble
2007/11/01 A New Purge Pump and Service Pack are Now Used {107P, 1408, 1900}
2007/12/24 Combustion Inserts in the Cylinder Head {1100}
G3520B Engines Air Lines
2007/12/24 A New More Rugged Sump Pump Is Now Used {1324}
797F Off-Highway Truck Power Train Relief Valve (Transmission Main) - Assemble
797F Off-Highway Truck Power Train Screen (Transmission Scavenge) - Remove and Install
797F Off-Highway Truck Power Train Transmission Hydraulic Control - Remove
C9.3 Marine Auxiliary Engines Turbocharger - Inspect
3176C, 3406E and 3456 Industrial Engines Air Shutoff - Test
G3520B Engines Engine Oil Pressure Sensor