Speed Sensor - Clean/Inspect
Show/hide table
 | |
| 图 1 | g01429707 |
典型的 C11 或 C13 汽油发动机左侧视图 (1) 辅助转速传感器 (2) 主转速传感器 | |
主转速传感器和辅助转速传感器安装在飞轮壳内。 这些传感器的每一个都是通过螺栓拉到位的。
- 从飞轮壳上拆下转速传感器。 检查转速传感器塑料端部的状况，查看是否有磨损和/或污染物。
- 检查转速传感器的端面是否有金属刮屑和其它碎屑。 将转速传感器安装在前飞轮壳上。
Caterpillar Information System:
C32 Marine Auxiliary Engine Monitoring System
3500B Engines for Caterpillar Built Power Modules with the ADEM 3 Electronic Control Module Speed Control (Switch) - Test
3176C, 3406E and 3456 Industrial Engines Sensor Supply - Test
C4.4 Industrial Engine Belt Tensioner - Inspect
C11 and C13 Petroleum Engines Refill Capacities and Recommendations
C11 and C13 Petroleum Engines Engine Description
C11 and C13 Petroleum Engines Model View Illustrations
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290} Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
C11 and C13 Petroleum Engines Safety Messages
3176C, 3406E and 3456 Industrial Engines Speed/Timing - Test
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 1716 - FMI 13
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission, SPN 1716 - FMI 8
G3600 Engines Diagnostic Trouble Codes
G3600 Engines Event Codes
C32 Marine Auxiliary Engine Configuration Parameters
G3520B Industrial Engines Prelubrication - Test
Reuse and Salvage for Camshafts {1210, 1210} Reuse and Salvage for Camshafts {1210, 1210}
2008/01/01 Improved Routing of the Injector Wiring Harness {1290, 1408}
312D2 and 313D2 Excavators Machine Systems Storage Box and Covers (Cab) - Remove and Install
14L Motor Grader Machine Systems Circle Drive - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C4.4 Industrial Engine Maintenance Interval Schedule
3176C, 3406E and 3456 Industrial Engines Sensor Signal (Analog, Active) - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install