2008/02/18 Caterpillar


New Tooling is Available to Assist During Disassembly and Assembly of the Ejector Bucket {6128}

Usage:

R1700G 8XZ
Load Haul Dump:
R1600 (S/N: 9EW1-UP; 9XP1-UP)
R1600G (S/N: 9PP1-UP)
R1700G (S/N: 8XZ421-UP; SBR1-UP)

New tooling is available to assist during disassembly and assembly of the ejector bucket. The new tooling supports the ejector cylinders in the horizontal position during installation and removal of the main ejector plate.

Refer to the following information for the above listed machines.

Ejector Cylinder Support Tooling for R1600, R1600G and R1700G

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     304-6261     Support     2    



    Illustration 1g01338208

    Rear view of the ejector bucket




    Illustration 2g01429483

  1. Install 304-6261 Support in order to support ejector cylinder (1) in the horizontal position.

  1. Repeat Step 1 for the other side ejector cylinder.

Caterpillar Information System:

785D OEM Off-Highway Truck Engine Crankcase Breather - Clean
785D OEM Off-Highway Truck Engine Air Precleaner - Clean
CB22, CB24, CB32 and CC24 Utility Compactors Hydraulic Tank Breather - Clean
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290} Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
3516B Engine for 994F and 994H Wheel Loaders Fuel Consumption Is Excessive
AP655D Asphalt Paver Propel System Location of Electrical Components (Propel System)
785D OEM Off-Highway Truck Engine Air Filter Service Indicator - Inspect
120M and 12M Motor Grader Machine Systems Bank Valve - Install - Rear Frame
785D OEM Off-Highway Truck Engine Air Filter Primary Element - Clean/Replace
PM-201 Cold Planer Machine Systems Service Support - Remove and Install
PM-201 Cold Planer Machine Systems Steering Linkage - Remove and Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train Differential and Bevel Gear (Center) - Assemble
New Abrasion Sleeve for the Cooler Hose of the Transmission{1375} New Abrasion Sleeve for the Cooler Hose of the Transmission{1375}
2007/12/24 An Improved Radiator Mount is Now Used on Paving Compactors {1351, 1353, 1374}
CB22, CB24, CB32 and CC24 Utility Compactors Battery or Battery Cable - Inspect/Replace
C4.4 Industrial Engine Belt Tensioner - Inspect
2007/11/05 An Update to the Testing and Adjusting Manual for Certain C-Series Skid Steer Loaders Has Been Made {5117}
2007/12/10 Updated Coolant Lines are Now Used in Medium Wheel Loaders {1377}
450E Backhoe Loader System Schematic
AP655D Asphalt Paver Propel System Machine Preparation for Troubleshooting
AP655D Asphalt Paver Propel System Visual Inspection
450E Backhoe Loader Hydraulic and Steering System General Information (Hydraulic System)
450E Backhoe Loader Hydraulic and Steering System Hydraulic Tank and Filter
450E Backhoe Loader Hydraulic and Steering System Piston Pump (Implement and Steering)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.