Engine to Torque Converter - Connect
连接步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 189-0412 | 开口销 | 1 |
| B | 1U-9200 | 杠杆式提升起重机 | 1 |
| 138-7574 | 连杆支架 | 1 | |
注: 清洁度是一项重要的因素。 组装之前，应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零件。 棉绒可能会留在零件上，从而引发故障。 检查所有零件。 如果任何零件磨损或损坏，则应使用新零件进行更换。 污垢及其他杂质可能损坏精密部件。 组装步骤应在清洁的工作面上进行。 务必盖好部件并采取适当保护措施。
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要，请更换部件。
- 将工具 (A) 、工具 (B) 和适当的起吊设备装在变矩器 (1) 上。 变矩器 (1) 的重量约为 1996 kg (4400 lb)。
Show/hide table
 | |
| 图 1 | g01428872 |
Show/hide table
 | |
| 图 2 | g01429093 |
- 安装 O 形密封圈 (3) 。
- 将变矩器 (1) 定位到发动机上，安装螺栓 (2) 。
Show/hide table
 | |
| 图 3 | g01428873 |
End By: 安装发动机和变矩器。 请参阅 拆解和装配, "变矩器 - 安装"。
Caterpillar Information System:
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184} Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
2007/11/05 Troubleshooting Procedure for the Engine Speed Sensor on Small Track-Type Tractors {1907}
994F Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Install
2007/11/05 A New Rear Hood Assembly is Available for Improved Durability {7251}
2007/12/31 Improvements for the Torque Converter {3101}
2007/11/05 An Improved Seal For The Standard Final Drive Is Now Available {4050, 7561}
854K Wheel Dozer and 992K Wheel Loader Engine from Torque Converter - Separate
312D2 and 313D2 Excavators Bucket Linkage - Lubricate
994F Wheel Loader Machine Systems Check and Relief Valve (Main Hydraulic) - Remove
374F Excavator Joystick Controls Alternate Patterns
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Position Sensor (Articulation Angle) - Adjust and Calibrate
993K Wheel Loader Power Train Torque Converter (Lockup)
2007/10/29 Rework Procedure for the Brackets of the Air Cleaner on Wheel Loaders {1051}
2007/11/05 The Parking Brake Group is Updated {4267}
Procedure to Install the New Lower Hitch Group on the 525C, 535C, and 545C Wheel Skidders{7057, 7100} Procedure to Install the New Lower Hitch Group on the 525C, 535C, and 545C Wheel Skidders{7057, 7100}
992K Wheel Loader Electrohydraulic System Piston Pump (Implement, RH)
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Transmission Power Flow
3516B Engine for 994F and 994H Wheel Loaders Fuel Consumption Is Excessive
906, 907 and 908 Compact Wheel Loaders Power Train Master Cylinder (Front Brake) - Remove and Install
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290} Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
906, 907 and 908 Compact Wheel Loaders Power Train Piston Motor (Hydrostatic) - Assemble
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Gear Pump (Implement) (Steering) (Hydraulic Fan) - Disassemble
906H, 906H2, 907H, 907H2, 908H and 908H2 Compact Wheel Loaders Machine Systems Gear Pump (Implement) (Steering) (Hydraulic Fan) - Assemble
2007/12/10 Updated Coolant Lines are Now Used in Medium Wheel Loaders {1377}