Engine and Torque Converter - Remove
拆卸步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 8T-0372     | 螺栓     | 2     |
B     | 138-7575     | 连杆支架     | 2     |
C     | 138-7573     | 连杆支架     | 2     |
D     | 309-2793     | 负载平衡装置     | 1     |
E     | 189-0412     | 开口销     | 2     |
F     | 1U-7498     | 支撑支座组件     | 2     |
开始:
- 安装发动机罩和发动机护罩。 请参阅拆解和装配, "发动机罩和发动机护罩 - 拆卸"。
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"。
- 断开软管组件 (4) 和线束组件 (3) 。
Show/hide table
图 1 | g01424291 |
Show/hide table
图 2 | g01424293 |
- 拆卸发动机机油油箱 (1) 的两颗底部安装螺栓 (2) 。 安装工具 (A) 以支持发动机机油油箱 (1) 。
- 拆卸剩余的安装螺栓 (2) 。 定位发动机机油油箱到工具 (A) 上,以将工具 (B) 和适当的起吊装置连接到发动机机油油箱 (1) 上。 发动机机油油箱 (1) 的重量约为 54 kg (120 lb)。 对另一侧重复此操作。
- 拆卸工具 (A) 和发动机机油油箱 (1) 。
- 拆卸螺栓 (6) 并拆卸板组件 (5) 。
Show/hide table
图 3 | g01424294 |
- 拆卸管 (7) 和 (8) 。
Show/hide table
图 4 | g01424301 |
- 拆卸管 (9) 。
Show/hide table
图 5 | g01424339 |
- 断开软管组件 (10) 。 断开线束组件 (11) 。 断开线束组件 (12) 。 拆卸螺栓 (13) 。 拆卸连接线束组件 (12) 到机架上的所有紧固件。 将线束组件 (12) 紧固到发动机上。
Show/hide table
图 6 | g01424340 |
- 如图所示,需要用两个人降下防护罩组件 (14) 。 防护罩组件 (14) 的重量约为 79 kg (175 lb)。
Show/hide table
图 7 | g01424342 |
- 断开电缆组件 (15) 和 (16) 。
Show/hide table
图 8 | g01424353 |
- 断开软管组件 (17) 。
Show/hide table
图 9 | g01424354 |
- 将阀 (19) 转到闭合位置。 断开软管 (20) 。
Show/hide table
图 10 | g01424355 |
- 断开软管组件 (18) 、 (21) 和 (22) 。
- 打开中间检修门。 拆下面板组件 (23) 。 断开软管组件 (24) 和 (25) 。
Show/hide table
图 11 | g01424357 |
- 拆下面板组件 (26) 。 从中间机架组件 (30) 上断开支架组件 (27) 、 (28) 和 (29) 。
Show/hide table
图 12 | g01424358 |
- 断开线束组件 (31) 。 断开中间机架组件 (30) 的支架组件 (32) 和 (33) 。
Show/hide table
图 13 | g01426453 |
典型范例 |
- 断开线束组件 (34) 。 从中间机架组件 (30) 上断开支架组件 (35) 。
Show/hide table
图 14 | g01426456 |
- 将工具 (A) 和合适的起吊设备连接到中间机架组件 (30) 。 中间机架组件 (30) 的重量约为 181 kg (400 lb)。
Show/hide table
图 15 | g01426458 |
- 拆卸面板组件 (37) 。
Show/hide table
图 16 | g01426607 |
- 拆卸板组件 (38) 。 对另一侧重复此操作。
- 将工具 (C) 和适当的起吊设备连接在扶梯组件 (39) 上。 扶梯组件 (39) 的重量约为 145 kg (320 lb)。 拆卸扶梯组件 (39) 。
Show/hide table
图 17 | g01426608 |
- 将工具 (C) 和适当的起吊设备连接在支撑组件 (40) 上。 支撑组件 (40) 的重量约为 181 kg (400 lb)。
Show/hide table
图 18 | g01426637 |
- 断开支撑组件 (40) 上的卡箍 (41) 。 拆卸螺栓 (42) 和 (43) 。
Show/hide table
图 19 | g01426639 |
- 断开卡箍 (44) 。 拆下螺栓 (45) ,然后拆卸支撑组件 (40) 。
Show/hide table
图 20 | g01427105 |
- 从变矩器和泵上断开所有必要的软管组件 (46) ,以便拆卸发动机和变矩器。
Show/hide table
图 21 | g01427106 |
- 将工具 (D) 、工具 (E) 及适当起吊设备连在发动机和变矩器 (47) 上。 发动机和变矩器 (47) 的重量约为 5580 kg (12,300 lb)。
Show/hide table
图 22 | g01427108 |
- 拆下螺栓 (48) 和盖 (49) 。 对另一侧重复此操作。 拆下螺栓 (50) 。
Show/hide table
图 23 | g01427876 |
Show/hide table
图 24 | g01427921 |
- 拆卸发动机和变矩器 (47) 。
- 将发动机和变矩器 (47) 定位到工具 (F) 和适当的挡板上。
Show/hide table
图 25 | g01427961 |
Caterpillar Information System:
D3K, D4K and D5K Track-Type Tractors Power Train Oil
C27 and C32 Engines for Caterpillar Built Machines Flywheel Housing
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Monitoring System (Brake Functions)
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System General Information (Brake, Hydraulic Fan System)
The Main Power Circuit Breaker is Tripping{1420} The Main Power Circuit Breaker is Tripping{1420}
994F Wheel Loader Machine Systems Expansion Tank (Air) (European Market) - Install
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/22 Use Care During Disassembly of the Fuel Manifolds {1252, 1274}
2007/10/29 A New Start Switch Gp Is Now Used {1416}
D11T Track-Type Tractor Fuel System Primary Filter (Water Separator) - Drain
D7R Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
D11T Track-Type Tractor Engine Valve Lash - Check/Adjust
994F Wheel Loader Machine Systems Gear Pump (Pilot System, Hydraulic Oil Cooler) - Install
Possible Early Failure Of The Hydraulic Oil Filter{3004, 3067, 5068} Possible Early Failure Of The Hydraulic Oil Filter{3004, 3067, 5068}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263} Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Brake Accumulator
854K Wheel Dozer and 992K Wheel Loader Hood and Engine Enclosure - Install
D11T Track-Type Tractor Cooler Cores and A/C Condenser - Clean
938H Wheel Loader and IT38H Integrated Toolcarrier Hydraulic System Pilot Valve
613G Wheel Tractor-Scraper Steering System Steering Control Valve
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Control Manifold (Brake, Hydraulic Fan)
993K Wheel Loader Electrohydraulic System Electrohydraulic System
2007/12/31 Improved Rod Seals for the Lift Cylinder Are Now Available {5102}
IT38H Integrated Toolcarrier and 938H Wheel Loader Braking and Hydraulic Fan System Brake Control Valve (Service)