Belt Tensioner
Show/hide table
Illustration 1 | g03835301 |
Show/hide table
Specifications for 193-7732 Belt Tensioner | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
A | - | - | Minimum limited travel is 71 degrees. |
1 | - | - | Assembly spring torque is |
Caterpillar Information System:
3500B and 3500C Marine Propulsion Engines Engine Will Not Crank
3608 Engine Governor - Install
3608 Engine Governor - Remove
3608 Engine Crankcase Explosion Relief Valve - Remove and Install
C-10 and C-12 Truck Engines Exhaust Manifold
C-10 and C-12 Truck Engines Exhaust Manifold
3608 Engine Vibration Damper - Remove
3608 Engine Rocker Arm - Disassemble
2007/10/22 The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
3608 Engine Valve Mechanism - Install
3608 Engine Camshaft - Remove
2007/10/15 An Improved Air Cleaner Assembly is Now Used {1051, 1054}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
3608 Engine Governor Drive - Assemble - Later
3608 Engine Fuel Injector - Remove
3608 Engine Fuel Injector - Install
C15 and C18 Petrolem Generator Set Engines Sensor Signal (Analog, Active) - Test
3608 Engine Fuel Priming Pump - Disassemble
3608 Engine Fuel Priming Pump - Assemble
3608 Engine Fuel Transfer Pump - Install
3608 Engine Air Inlet Shutoff - Remove and Install
C15 and C18 Petrolem Generator Set Engines Sensor Signal (Analog, Passive) - Test
3608 Engine Exhaust Manifold - Remove and Install
Procedure to Update a Standard TH48-E80 Oil/Gas Transmission to a Warm-Up Mode TH48-E80 Oil/Gas Transmission{1408, 3083, 3160, 3168, 4800, 7610} Procedure to Update a Standard TH48-E80 Oil/Gas Transmission to a Warm-Up Mode TH48-E80 Oil/Gas Transmission{1408, 3083, 3160, 3168, 4800, 7610}