The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
- Caterpillar Products:
- All
Description of Change: The descriptions for programmable parameters within the Engine Monitoring System have changed with the release of new software for Caterpillar Electronic Technician (ET). The descriptions were changed in order to better describe the event level settings.
Adaptable To: The release of the new software, CAT ET 2007C v 1.0, is adaptable to all Caterpillar products that have a programmable monitoring system. Refer to Illustration 1 for an example of the former descriptions. Refer to Illustration 2 for an example of the new descriptions.
Show/hide table
Illustration 1 | g01421759 |
Former descriptions |
Show/hide table
Illustration 2 | g01421761 |
New descriptions |
Caterpillar Information System:
3608 Engine Valve Mechanism - Install
3608 Engine Camshaft - Remove
2007/10/15 An Improved Air Cleaner Assembly is Now Used {1051, 1054}
2007/10/01 A New Base for the Engine Oil Cooler and Engine Oil Filter is Now Used {1306, 1378}
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3608 Engine Idler Gears (Rear) - Install
3608 Engine Idler Gears (Rear) - Remove
3608 Engine Crankshaft Rear Seal - Install
C15 and C18 Petrolem Generator Set Engines Cat Data Link - Test
C15 and C18 Petrolem Generator Set Engines CAN Data Link - Test
C15 and C18 Petrolem Generator Set Engines Sensor Supply - Test
3608 Engine Rocker Arm - Disassemble
3608 Engine Vibration Damper - Remove
C-10 and C-12 Truck Engines Exhaust Manifold
C-10 and C-12 Truck Engines Exhaust Manifold
3608 Engine Crankcase Explosion Relief Valve - Remove and Install
3608 Engine Governor - Remove
3608 Engine Governor - Install
3500B and 3500C Marine Propulsion Engines Engine Will Not Crank
3176C and 3196 Engines for Caterpillar Built Machines Belt Tensioner
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
3608 Engine Governor Drive - Assemble - Later
3608 Engine Fuel Injector - Remove