Vibration Damper and Pulley
Show/hide table
 | |
| Illustration 1 | g01421007 |
(1) Damper assembly (2) Adapter (3) Crankshaft pulley (4) Bolts | |
(4) Apply molybdenum disulfide or a graphite based lubricant to the threads of the bolts before assembly.
Caterpillar Information System:
C13 Engine Crankshaft - Install
C13 Engine Crankshaft Main Bearings - Install
C27 and C32 Industrial and Petroleum Engines Turbocharger
C27 and C32 Industrial and Petroleum Engines Turbocharger
G3520B Engine Reference Material
3608 Engine Idler Gears (Front) - Install
3608 Engine Idler Gears (Front) - Remove
3608 Engine Crankshaft Front Seal - Install
C15 and C18 Petrolem Generator Set Engines Oil Temperature Is High
2007/10/01 Improvements for the Engine Oil Cooler Are Now Used {1378}
2007/10/08 Improvements for the Engine Oil Cooler Are Now Used {1378}
2007/10/01 Improvements for the Engine Oil Cooler Are Now Used {1378, 1380}
G3520B Engine Control Panel - If Equipped
C-10 and C-12 Truck Engines Piston and Rings
C11 and C13 Engines Engine Oil Filter Base
C15 and C18 Petrolem Generator Set Engines Sensor Supply - Test
C15 and C18 Petrolem Generator Set Engines CAN Data Link - Test
C15 and C18 Petrolem Generator Set Engines Cat Data Link - Test
3608 Engine Crankshaft Rear Seal - Install
3608 Engine Idler Gears (Rear) - Remove
3608 Engine Idler Gears (Rear) - Install
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
3176C and 3196 Engines for Caterpillar Built Machines Exhaust Manifold
2007/10/01 A New Base for the Engine Oil Cooler and Engine Oil Filter is Now Used {1306, 1378}