C27 and C32 Industrial and Petroleum Engines Caterpillar

Turbocharger

Usage:

Show/hide table




Illustration 1	g01420821

(1) Torque for clamp assembly ... 14 ± 1 N·m (125 ± 9 lb in)

(2) Torque for compressor clamp assembly ... 10.17 ± 1.00 N·m (90 ± 9 lb in)

Note: Apply 4C-5599 Anti-Seize Compound on the washer face and the threads of the mounting bolts for the turbocharger before assembly.

(3) Torque for four locknuts ... 55 ± 9 N·m (41 ± 7 lb ft)

Caterpillar Information System:

C27 and C32 Industrial and Petroleum Engines Turbocharger

G3520B Engine Reference Material

3608 Engine Idler Gears (Front) - Install

3608 Engine Idler Gears (Front) - Remove

3608 Engine Crankshaft Front Seal - Install

C15 and C18 Petrolem Generator Set Engines Oil Temperature Is High

2007/10/01 Improvements for the Engine Oil Cooler Are Now Used {1378}

2007/10/08 Improvements for the Engine Oil Cooler Are Now Used {1378}

2007/10/01 Improvements for the Engine Oil Cooler Are Now Used {1378, 1380}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073} Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

2007/10/22 A New Spring Helps to Relieve Combustion Pressure {1550}

2007/10/08 Improved Exhaust Riser Brackets are Now Available {1059, 1154}

C13 Engine Crankshaft Main Bearings - Install

C13 Engine Crankshaft - Install

G3406 and G3412 Generator Set Engines Vibration Damper and Pulley

G3520B Engine Control Panel - If Equipped

C-10 and C-12 Truck Engines Piston and Rings

C11 and C13 Engines Engine Oil Filter Base

C15 and C18 Petrolem Generator Set Engines Sensor Supply - Test

C15 and C18 Petrolem Generator Set Engines CAN Data Link - Test

C15 and C18 Petrolem Generator Set Engines Cat Data Link - Test

3608 Engine Crankshaft Rear Seal - Install

3608 Engine Idler Gears (Rear) - Remove

3608 Engine Idler Gears (Rear) - Install