Transmission Oil Cooler - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
- Position transmission oil cooler (11) and install bolts (10).
Show/hide table
Illustration 2 g01420284 - Install two bolts (9).
Show/hide table
Illustration 3 g01420281 - Connect hoses (3), (5), and (6). Connect tube assemblies (4).
Show/hide table
Illustration 4 g01421183 - Connect hose assemblies (8).
Show/hide table
Illustration 5 g01421195 - Install panels (7).
Show/hide table
Illustration 6 g01420296 - Position panel (2) and install bolts (1).
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change" or Operation and Maintenance Manual, "Cooling System Extended Life Coolant - Change" for the proper filling procedure.
Show/hide table
Illustration 1 | g01420282 |
Caterpillar Information System:
CP54 and CS54 Vibratory Soil Compactors Propel System Pressure Override Valve (Axle Propel Pump) - Test and Adjust
12M and 120M Motor Graders Power Train Transmission Oil Cooler - Remove
2007/10/08 Test Lines Are No Longer Used {1359, 4250, 4300, 4324, 5050, 5070, 5117}
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electronic Control Module
CP56B, CP68B, CS56B and CS68B Vibratory Soil Compactors Machine Systems Hydraulic Cylinder (Leveling Blade)
14L Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Eccentric Weight Housing Group
CP54 and CS54 Vibratory Soil Compactors Propel System Pressure Override Valve (Drum Propel Pump) - Test and Adjust
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Eccentric Weight Housing Group
12M and 120M Motor Graders Power Train Wheel and Tire (Rear) - Remove and Install
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Seat - Assemble
414E, 416E, 420E and 430E Backhoe Loaders Machine Systems Seat - Disassemble
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207} Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
CP76 and CS76 Vibratory Compactors Machine Systems Hydraulic Schematic (Hydraulic Fan)
The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133} The Torque Converter Inlet Relief Valve May Come Out of The Bore{3133}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Metering Pump (Steering)
C175-16 Locomotive Engine Fuel Lines - Fuel Lines for the High Pressure Fuel Pump
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Flood Lighting
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Glow Plug" {1412}
2008/04/14 Correction to Systems Operation Testing and Adjusting , "Engine Start" {1408, 1450}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Stop (Remote Control)" {1408, 7000}
2008/04/14 Correction to Systems Operation Troubleshooting Testing and Adjusting , "Engine Start (Remote Control)" {7000}
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Steel
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Soil Compactors Machine Systems Smooth Drum Scraper - Flex