- Articulated Truck:
- 735 (S/N: B1N1012-UP)
- 740 (S/N: B1P2882-UP)
- 740 EJECTOR (S/N: B1R370-UP)
ReferenceTesting and Adjusting, RENR5124, "735 Articulated Truck Power Train"
ReferenceTesting and Adjusting, RENR5134, "740 and 740 EJECTOR Articulated Trucks Power Train"
ReferenceTesting and Adjusting, RENR5126, "735 and 740 Articulated Trucks Hoist, Steering, Suspension, and Fan Drive Systems"
ReferenceTesting and Adjusting, RENR5174, "740 EJECTOR Articulated Truck Ejector, Steering, Suspension, and Fan Drive Systems"
Test lines are no longer used on the Articulated Trucks that are listed. The following Illustrations show the locations for the test ports on these machines.
| Test Points | |
|---|---|
| A | Center Brake Pressure |
| B | Front Brake Pressure |
| C | Fan Drive Pressure |
| D | Steering Load Sensing Pressure |
| E | Hoist (Ejector) Pressure |
| F | Hoist System Pilot Pressure |
| G | Brake Pump Pressure |
| H | Output Transfer Gear and Differentials |
| J | Main Steering Pressure |
| K | Secondary Steering Pressure |
 | |
| Illustration 1 | g01420746 |
(A) This test port is for the center brake pressure. The test port is located under the right side of the cab behind the side cover next to the brake accumulators. (B) This test port is for the front brake system pressure. This test port is located under the right side of the cab. The port is behind the side cover and next to the brake accumulators. | |
 | |
| Illustration 2 | g01420757 |
(C) This test port is for the fan drive pressure. This test port is located at the right hand rear side of the cab next to the fan. | |
 | |
| Illustration 3 | g01420786 |
(D) This test port is for the steering load sensing pressure. This test port is located under the floor access cover for the steering tank on the right side of the machine next to the check and combiner valve (1). | |
 | |
| Illustration 4 | g01421253 |
(E) This test port is for the Hoist (Ejector) Pressure. This test port is located above the hoist control valve. | |
 | |
| Illustration 5 | g01420787 |
(F) This test port is for the hoist system pilot pressure. This test port is located at the rear left side of the front chassis. (G) This test port is for the brake pump pressure. This test port is located at the rear left side of the front chassis. (H) This test port is for the output transfer gear and the differentials. This test port is located at the rear left side of the front chassis. | |
 | |
| Illustration 6 | g01420788 |
(J) This test port is for the main steering pressure. This test port is located under the floor access cover for the steering tank on the right side of the machine next to the check and combiner valve (1). (K) This test port is for the secondary steering pressure. This test port is located under the floor access cover for the steering tank on the right side of the machine next to the check and combiner valve (1). | |