Safety Messages
Show/hide table
| |
| 图 1 | g01425451 |
|
装配热交换器的船用发动机 | |
Show/hide table
| |
| 图 2 | g01425452 |
|
装配热交换器的船用发动机 | |
Show/hide table
| |
| 图 3 | g01425436 |
|
装配龙骨冷却系统的船用发动机 | |
Show/hide table
| |
| 图 4 | g01425437 |
|
装配龙骨冷却系统的船用发动机 | |
这些警告标志位于发动机前端附近气门室盖的底座上，以及控制面板顶部。
Show/hide table
| |
| 图 5 | g01125097 |
Show/hide table
 |
|
在阅读和了解操作和保养手册中的说明和警告之前，请勿操作或触动发动机。 不遵守指导或忽视警告，可能会导致人身伤亡。 有关替换手册，请与卡特彼勒代理商联系。 正确保养是您的职责。 |
这些警告标志位于膨胀箱顶部。
Show/hide table
| |
| 图 6 | g01053324 |
Show/hide table
|
|
有压力的系统! 高温冷却液会引起严重烫伤和伤亡。发动机停机，等待冷却系统部件冷却下来后再打开冷却系统加注口盖。缓慢松开冷却系统加注口盖，以释放掉所有压力。执行任何冷却系统保养前必须阅读和理解操作和保养手册。 |
这些警告标志位于空气滤清器盖的右侧和左侧。
Show/hide table
| |
| 图 7 | g01055438 |
Show/hide table
|
|
不要使用乙醚。 此机器配备有预热塞。 使用乙醚会引起爆炸或失火而导致人员伤亡。 阅读并遵守操作和保养手册中的发动机起动程序。 |
Caterpillar Information System:
C32 Marine Engine Model View Illustrations
PL1000E Communication ECM Modbus Master
G3408C and G3412C Engines Air Cleaner
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines General Information
C0.5, C0.7, C1.1, C1.5, C1.6 and C2.2 Industrial Engines Cylinder Head - Inspect
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Piston Ring Groove - Inspect
G3520B Engines Pressure Switch (Hydrax)
C15 and C18 Petrolem Generator Set Engines Electrical Power Supply - Test
Replacing Low Pressure Actuator Valves{1130} Replacing Low Pressure Actuator Valves{1130}
3500B Locomotive Engines Overspeed Verification Test
14L Motor Grader Machine Systems Blade Lift Arm - Install
14L Motor Grader Machine Systems Blade Lift Arm - Remove
G3408C and G3412C Engines Gas Engine Ignition
C32 Marine Engine Plate Locations and Film Locations
3500B Engines Fan - Remove and Install
G3500B Engines Jacket Water Temperature Sensor
3500B Engines Fuel Cooler - Remove and Install
G3408C and G3412C Engines Carburetor
325D and 329D Excavators Hydraulic System Cylinder Drift - Check - Empty Bucket
3500B Engines Radiator Group - Remove
345C Excavator Machine System Specifications Bucket Cylinder
2007/09/17 Ensure that the 9X-9591 Electrical Converter Gp is Wired Correctly {1421, 1901, 7490}
2007/09/17 A New Inlet Relief Valve for the Torque Converter and a New Lubrication Relief Valve for the Speed Increaser Are Now Used {3133, 3206}
Instructions for Welding the "K Series" Adapters{6803} Instructions for Welding the "K Series" Adapters{6803}