450E Backhoe Loader Machine Systems Caterpillar


Bank Valve (Loader) - Install

Usage:

450E EBL

Installation Procedure



    Illustration 1g01379089

  1. Attach a suitable lifting device to bank valve (23). The weight of bank valve (23) is approximately 40 kg (90 lb). Install bank valve (23) and bolts (22).


    Illustration 2g01379088

  2. Connect tube assemblies (16) and (18). Connect hose assemblies (17), (19), and (20). Connect harness assembly (21).


    Illustration 3g01379086

  3. Connect hose assemblies (11), (12), and (13). Connect tube assemblies (14) and (15).


    Illustration 4g01379084

  4. Connect tube assemblies (9) and (10). Connect hose assembly (8). Install pin (7) in order to connect yokes (6).


    Illustration 5g01242019

  5. Install floorplate (4) and bolts (5).


    Illustration 6g01118850

  6. Install floor mat (1). Install plate (2) and bolts (3). Repeat for the other side.

  7. Fill the hydraulic system with clean oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".

Caterpillar Information System:

414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Backhoe
Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220} Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 06
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 05
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 03
770 and 772 Off-Highway Truck/Tractors Pin (Body Retaining) - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
2007/05/28 A new Hose is Used for the Inlet to the Turbocharger {1051, 1054}
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
160M Motor Grader Engine Supplement Engine - Install
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
450E Backhoe Loader Machine Systems Bank Valve (Backhoe) - Remove
16M Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429} Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429}
16M Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2007/08/27 A New Temperature Gauge is Used {7450}
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Secondary Steering System
2009/08/24 An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2007/05/28 An Improved Battery Isolation Control is Now Used {1402, 1408}
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Priming Pump and Fuel Filter Base - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injection Lines - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injector Cover - Remove and Install
C6.6 Engines For Caterpillar Built Machines CID 2417 FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.