Control Manifold (Pilot Operated) - Inlet Manifold for the Backhoe
Show/hide table
Illustration 1 | g01623975 |
(1) Torque for the O-ring plug ... 100 N·m (75 lb ft)
(2) Torque for the cap of the regulator kit ... 100 N·m (75 lb ft)
(3) Torque for the O-ring plug ... 70 N·m (50 lb ft)
(4) Torque for the relief valve group ... 45 N·m (33 lb ft)
(5) Torque for the O-ring plug ... 20 N·m (15 lb ft)
(6) Torque for the flow control valve group ... 20 N·m (15 lb ft)
Caterpillar Information System:
Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220} Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220}
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 06
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 05
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 03
770 and 772 Off-Highway Truck/Tractors Pin (Body Retaining) - Remove and Install
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
2007/05/28 A new Hose is Used for the Inlet to the Turbocharger {1051, 1054}
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
160M Motor Grader Engine Supplement Engine - Install
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
160M Motor Grader Engine Supplement Engine - Remove
450E Backhoe Loader Machine Systems Bank Valve (Loader) - Install
450E Backhoe Loader Machine Systems Bank Valve (Backhoe) - Remove
16M Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429} Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429}
16M Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2007/08/27 A New Temperature Gauge is Used {7450}
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Secondary Steering System
2009/08/24 An Improved Solenoid Valve Group Is Used In Transmissions With ICM For Increased Reliability And Longer Service Life {3124, 3167, 3174}
2007/05/28 An Improved Battery Isolation Control is Now Used {1402, 1408}
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Priming Pump and Fuel Filter Base - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injection Lines - Remove and Install
C4.4 (MECH) Industrial Engine and Generator Sets Fuel Injector Cover - Remove and Install