Pin (Body Retaining) - Remove and Install
部件概述
Show/hide table
 |
升起的车箱可能无警告意外地跌落，造成人身伤亡。 当必须在车箱升起的卡车下工作时，通过车架和车箱固定支架上的销孔安装车箱的固定销。 |
Show/hide table
 | |
| 图 1 | g01383344 |
弹簧杆 (X) 弹簧杆 (Z) (1) 车斗固定销 (2) 固定托架 (3) 车架支承 | |
安装步骤
- 安装车轮楔子。 请参阅拆解和组装, "轮楔块（前和后）- 拆卸和安装"。
- 将卡车车斗升到完全升起的位置。 停运发动机，确保变速箱操纵杆处于停车位置。
- 拉出弹簧杆 (X) ，从左侧存贮位置卸下车箱固定销 (1) 。
Show/hide table
 | |
| 图 2 | g01383349 |
- 拉出弹簧杆 (Z) ，通过车架支承 (3) 的销孔和 车箱固定支架 (2) 安装车箱固定支架 (1) 。
注: 为了固定车箱固定销，确保车箱固定销在释放弹簧杆 (Z) 之前完全在位。
Show/hide table
 | |
| 图 3 | g01383355 |
- 对右侧执行步骤 3 和步骤 4。
拆卸步骤
Show/hide table
| | |
| 图 4 | g01383344 |
弹簧杆 (X) 弹簧杆 (Z) (1) 车斗固定销 (2) 固定托架 (3) 车架支承 | |
- 升起卡车车斗到完全升起位置以便释放车箱固定销 (1) 的所有压力。 停运发动机，确保变速箱操纵杆处于停车位置。
- 拉出弹簧杆 (Z) ，从左侧的车架支承 (3) 和固定支架 (2) 上拆下车斗固定销 (1) 。
Show/hide table
 | |
| 图 5 | g01822316 |
- 拉出弹簧杆 (X) ，然后将车斗固定销 (1) 安装到存储位置中。
注: 为了固定车箱固定销，确保车箱固定销在释放弹簧杆 (X) 之前完全在位。
Show/hide table
| | |
| 图 6 | g01383349 |
- 对右侧执行步骤 2 和步骤 3。
- 降下卸载车斗。
- 拆下车轮楔子。 请参阅拆解和组装, "轮楔块（前和后）- 拆卸和安装"。
Caterpillar Information System:
422E, 428E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
2007/05/28 A new Hose is Used for the Inlet to the Turbocharger {1051, 1054}
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Loader
160M Motor Grader Engine Supplement Engine - Install
2007/06/04 A Dye is Now Added to the Engine Oil at the Factory {1348}
160M Motor Grader Engine Supplement Engine - Remove
16M Motor Grader Machine Systems Solenoid Valve and Manifold (Hydraulic Fan) - Remove and Install
420E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Before Roading the Machine
16M Motor Grader Machine Systems Ripper - Install
16M Motor Grader Machine Systems Ripper - Remove
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Valve (Auxiliary)(Loader)(Pilot Operated)
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 03
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 05
24M Motor Grader Power Train Electronic Control System MID 027 - CID 0681 - FMI 06
Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220} Installation of the AccuGrade® - Grade Control System for the Motor Graders{7220}
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Hydraulic and Steering System Control Manifold (Pilot Operated) - Inlet Manifold for the Backhoe
450E Backhoe Loader Machine Systems Bank Valve (Loader) - Install
450E Backhoe Loader Machine Systems Bank Valve (Backhoe) - Remove
16M Motor Grader Machine Systems Front Frame from Rear Frame (Articulating Hitch) - Separate
Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429} Installing the 307-6237 Roading Lights Mounting Gp (KIT) (GERMANY) (ITALY){1429}
16M Motor Grader Machine Systems Front Frame to Rear Frame (Articulating Hitch) - Connect
2007/08/27 A New Temperature Gauge is Used {7450}
IT38H Integrated Toolcarrier and 938H Wheel Loader Steering System Secondary Steering System