Engine Oil Cooler - Remove
Removal Procedure
Start By:
- Remove the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Remove".
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
- Remove mount (1) .
Show/hide table
 | |
| Illustration 1 | g01377245 |
- Disconnect tube assemblies (2) and (3) .
- Disconnect hose (4) .
- Remove bolts (5) and remove studs (6) .
Show/hide table
 | |
| Illustration 2 | g01377258 |
- Remove engine oil cooler (7) .
Caterpillar Information System:
C9 Agricultural Engine for Challenger Tractors Injector Solenoid - Test
C32 Marine Propulsion Engines Electrical Power Supply - Test
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348} Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
3508C, 3512C and 3516C Locomotive Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front)
C32 Marine Auxiliary Engines Injector Solenoid - Test
Elevated Amounts of Potassium and Aluminum in Oil Samples on 2007 On-Highway Engines{0645} Elevated Amounts of Potassium and Aluminum in Oil Samples on 2007 On-Highway Engines{0645}
C9 Agricultural Engine for Challenger Tractors Fuel Filter Differential Pressure - Test
2007/05/14 Do Not Allow the Engine Status Control Module to Overheat {1901, 7490}
2007/05/21 A "Do Not Weld" Film is Used {7557}
C32 Marine Propulsion Engines Speed Control - Test
C15 On-Highway Engine Flywheel Housing - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Piston and Rings
3408B and 3408C Industrial and Marine Engines Vibration Damper and Pulley
3408C and 3412C Marine Engines Flywheel Housing
C15 On-Highway Engine Cylinder Head - Remove
Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620} Instructions for Determining The Secondary Voltage of the Transformer{1555, 7620}
C18 Marine Engines Engine Crankcase Breather - Clean
C3.3 Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
C3.3 Industrial Engine Fuel Injection Lines - Remove and Install
C3.3 Industrial Engine Front Cover - Remove and Install
C3.3 Industrial Engine Fuel Injection Pump - Remove