Auxiliary Water Pump - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7573 | Link Bracket | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Show/hide table
Illustration 1 g01341832 - Remove retainers (2).
- Remove bolts (3) and elbow (1).
- Remove nuts (4) and the bolts. Remove bolts (8) and adapter (9).
- Remove hose assembly (7).
- Remove bolts (5) and cover (6).
Show/hide table
Illustration 2 g01252196 - Remove bolts (10) and adapter (11).
Show/hide table
Illustration 3 g01252198 - Remove the bearing from adapter (11), if necessary.
- Remove O-ring seal (12) from adapter (11).
Show/hide table
Illustration 4 g01341944 - Attach Tooling (A) and a suitable lifting device to auxiliary water pump (14). The weight of auxiliary water pump (14) is approximately
31 kg (68 lb) . - Remove bolts (13). Pull auxiliary water pump (14) out of the front housing.
Caterpillar Information System:
3412E Engine for Caterpillar Built Machines System Overview
C13 and C15 On-highway Engines Diagnostic Capabilities
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Connector Contact Description
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Warning Operation
2007/01/29 New Specifications for Valve Lash on Engines that Operate at 1200 RPM and at 1500 RPM {1100}
Updating the 0R-7942 Alternators Used on some C-12 Caterpillar Engines{1405} Updating the 0R-7942 Alternators Used on some C-12 Caterpillar Engines{1405}
C4.4 and C6.6 Engines for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
C4.4 and C6.6 Engines for Caterpillar Built Machines System Configuration Parameters
3500B Industrial Engines Refill Capacities and Recommendations
An Improved Water Temperature Regulator in C7 On-Highway Truck Engines is Now Used{1355, 1380, 1393} An Improved Water Temperature Regulator in C7 On-Highway Truck Engines is Now Used{1355, 1380, 1393}
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Transmission Oil Pan
3500B High Displacement Generator Set Engines Walk-Around Inspection - Exercise Inspection of Standby Generator Set Engines
3500C Marine Auxiliary Engines Sensor Signal (Analog, Passive) - Test
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Transmission Planetary
C15 and C18 Petrolem Generator Set Engines Engine Stalls at Low RPM
CX35 On-Highway Transmission Transmission Planetary
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Auxiliary Water Pump - Install
3524B Engines for 797 and 797B Off-Highway Trucks Checking Engine Cylinders
3500B Industrial Engines Safety Messages
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Engine Oil Cooler - Remove
3500B Industrial Engines Engine Oil and Filter - Change
3500B Industrial Engines Product Lifting
CX35 On-Highway Transmission Transmission Planetary