Control Valve (Bulldozer Tilt) - Standard
Show/hide table
 | |
| Illustration 1 | g03073776 |
Show/hide table
| Specification for 269-8154 Control Valve Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 102-7365 Bolt | Torque to 20 ± 3 N·m (177 ± 27 lb in). |
| 2 | 2 | 6V-5192 Socket Head Bolt | Torque to 20 ± 3 N·m (177 ± 27 lb in). |
| 3 | 2 | 4T-1108 Plug | Torque to 145 ± 15 N·m (107 ± 11 lb ft). |
| 4 | 1 | 161-2684 Screw | Torque to 20 ± 3 N·m (177 ± 27 lb in). |
| 5 | As required, use the following shims in order to obtain the distance (D) of 0.75 mm (0.030 inch) between the spring and the shim. Assemble the thick shim next to the spring. |
||
| 2 | 2J-2866 Shim | Thickness is 0.12 mm (0.005 inch). |
|
| 6 | 4T-4628 Shim | Thickness is 0.50 mm (0.020 inch). |
|
| 6 | 1 | 153-6976 Spring | Length under test force is 54 mm (2.1 inch). Test force is 0 N (0 lb). Free length after test is 54 mm (2.1 inch). |
| 7 | 1 | 4T-4631 Spring | Length under test force is 40 mm (1.6 inch). Test force is 67.6 ± 5.4 N (15.2 ± 1.2 lb). Free length after test is 51.8 mm (2.04 inch). |
| 8 | 1 | 100-8011 Plug | Torque to 300 ± 40 N·m (221 ± 30 lb ft). |
| 9 | 1 | 2S-2596 Spring | Length under test force is 7.9 mm (0.31 inch). Test force is 4.226 ± 0.338 N (0.950 ± 0.076 lb). Free length after test is 33.3 mm (1.31 inch). |
| 10 | 1 | 4T-1701 Spring | Length under test force is 59 mm (2.3 inch). Test force is 108 ± 5 N (24 ± 1 lb). Free length after test is 64.70 mm (2.547 inch). |
| 11 | 5 | 4B-4278 Washer | As required, use the washer in order to adjust the pressure setting. Maximum five washers can be used for the adjustment of pressure setting. Thickness of one washer is 1.6 mm (0.06 inch). |
| 12 | 1 | 4T-1860 Shuttle Valve Gp | Torque to 32 ± 5 N·m (283 ± 44 lb in). |
| 13 | 1 | 9J-8126 Orifice Plug | Torque to 9 to 14 N·m (80 to 124 lb in). |
Caterpillar Information System:
953D Track-Type Loader Hydraulic System Lift Circuit
2007/01/01 Improved End Bits and the Rework Procedure are Available for the Bulldozer Blade {6804}
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always On
AD55B Underground Articulated Truck Power Train Electronic Control System System Schematic
AD55B Underground Articulated Truck Power Train Electronic Control System Electronic Control Module (ECM) - Replace
AD55B Underground Articulated Truck Power Train Electronic Control System Hoist System Enable - Check
AD55B Underground Articulated Truck Power Train Electronic Control System Position Sensor (Body) - Calibrate
2007/06/11 Improved Monitoring for Primary and Secondary Steering is Now Used {4300, 4300, 7431}
AD55B Underground Articulated Truck Power Train Electronic Control System Transmission Clutch - Calibrate
AD55B Underground Articulated Truck Power Train Electronic Control System Speed Sensor - Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 01
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494} Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 04
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 13
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1711 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Fan and Gear Motor (Hydraulic Fan) - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Sound Information and Vibration Information
2007/01/15 Special Tall Flange Rollers Are Now Available {4180}
AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always Off