AD55B Underground Articulated Truck Power Train Electronic Control System Caterpillar


Electronic Control Module (ECM) - Replace

Usage:

AD55B JNW
Sebelum Modul Kontrol Elektronik (ECM, Electronic Control Module) Power Train/Chassis diganti, pastikan penggantian tersebut benar-benar diperlukan. ECM Power Train/Chassis jarang sekali menjadi penyebab timbulnya kode diagnostik. Selalu periksa bahwa ada baterai+ ke ECM Power Train/Chassis. Baterai+ diperlukan dari kontak konektor 1 ke kontak konektor 31 dan 39 pada konektor rangkaian kabel J-1 untuk ECM.

  1. Putar sakelar pemutus baterai dan sakelar kunci start ke posisi OFF.


    Ilustrasi 1g01153789
    Lokasi Modul Kontrol Elektronik (ECM) Power Train/Chassis
    (1 ) ECM Power Train/Chassis

  2. Lepaskan pelat penutup di bagian depan ruang operator.


    Ilustrasi 2g01153790
    ECM Power Train/Chassis
    (2 ) Konektor J-1
    (3 ) Konektor J-2


    Ilustrasi 3g01153791
    (4) Sekrup

  3. Lepaskan dua sekrup (4) dari konektor J-1 (2) dan konektor J-2 (3). Putuskan rangkaian kabel dari ECM Power Train/Chassis.

  4. Lepaskan empat baut yang menahan ECM Power Train/Chassis.

  5. Lepaskan ECM Power Train/Chassis.

  6. Posisikan ECM Power Train/Chassis yang baru dan pasang empat baut yang menahan ECM Power Train/Chassis.

    Catatan: Pastikan ECM Power Train/Chassis pengganti memiliki nomor suku cadang yang benar.

  7. Hubungkan rangkaian kabel ke ECM Power Train/Chassis. Pasang dua sekrup (4) ke konektor J-1 (2) dan konektor J-2 (3).

  8. Pasang pelat penutup.

  9. Putar sakelar pemutus baterai dan sakelar kunci start ke posisi ON.

Referensi: Untuk informasi lebih lanjut tentang pemuatan perangkat lunak, rujuk ke Pengoperasian Sistem, Pemecahan Masalah, Pengujian dan Penyetelan, "Modul Kontrol Elektronik (ECM) - Memprogram Flash".

Caterpillar Information System:

AD55B Underground Articulated Truck Power Train Electronic Control System Hoist System Enable - Check
AD55B Underground Articulated Truck Power Train Electronic Control System Position Sensor (Body) - Calibrate
2007/06/11 Improved Monitoring for Primary and Secondary Steering is Now Used {4300, 4300, 7431}
AD55B Underground Articulated Truck Power Train Electronic Control System Transmission Clutch - Calibrate
AD55B Underground Articulated Truck Power Train Electronic Control System Speed Sensor - Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Remove
953D Track-Type Loader Hydraulic System Tilt Circuit
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Water Pump - Remove and Install
AD55B Underground Articulated Truck Power Train Electronic Control System System Schematic
AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always On
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
2007/01/01 Improved End Bits and the Rework Procedure are Available for the Bulldozer Blade {6804}
953D Track-Type Loader Hydraulic System Lift Circuit
D6T Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt) - Standard
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 01
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494} Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.