Gear Motor (Hydraulic Fan) - Assemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
B | 1P-1857 | Retaining Ring Pliers | 1 |
- Inspect all parts and clean all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
- Inspect all seals. Damaged seals must be replaced. Use new Caterpillar seals for replacement.
Show/hide table
Illustration 1 g00901793 - Install lip seal (20). Use Tooling (B) and install retaining ring (19) in shaft cover (11).
Show/hide table
Illustration 2 g00901792 - Install seal (18) in shaft cover (11).
Show/hide table
Illustration 3 g00901791 - Install thrust plate (17), idler gear (15), and drive gear (16) in shaft cover (11).
Show/hide table
Illustration 4 g00901789 - Install thrust plate (14) on the idler gear and on the drive gear.
Show/hide table
Illustration 5 g00901785 - Install seal (12) and dowels (13) on both sides of housing (10).
Show/hide table
Illustration 6 g00901783 - Install housing (10) on shaft cover (11).
Show/hide table
Illustration 7 g00901782 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Install guide (7), spring (8), and relief valve (9) in end cover (5).
Show/hide table
Illustration 8 g00901781 - Install seal (6) in end cover (5).
Show/hide table
Illustration 9 g00901779 - Install end cover (5) on the housing. Install bolts (4).
Show/hide table
Illustration 10 g00901777 - Install woodruff key (3) in the drive gear.
Show/hide table
Illustration 11 g00906564 - Install adapter (2) on the drive gear.
Show/hide table
Illustration 12 g00901771 - Install the washer and nut (1). Tighten the nut to a torque of
55 ± 5 N·m (41 ± 4 lb ft) .
End By:
- Assemble the suction fan (fan and fan motor). Refer to Disassembly and Assembly, "Suction Fan (Fan and Fan Motor) - Assemble".
Caterpillar Information System:
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
777D Off-Highway Truck Fuel System - Fill
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Suction Fan (Fan and Fan Motor) - Remove
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Assemble - High Flow
287C2 Compact Track Loader and 287C, 277C, 277C2 and 297C Multi Terrain Loaders Machine Systems Gear Pump (Charge) - Disassemble - High Flow
2007/04/09 A New Retainer Improves the Field Service of the Hydraulic Oil Filter and Mounting Group {3004, 3067, 5068}
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Water Pump - Remove and Install
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer Electrical Connectors
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Belt Tensioner - Remove and Install
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install
770 and 772 Off-Highway Truck Suspension Cylinder Rear Suspension (Cylinder)
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Alternator - Remove and Install
773E Off-Highway Truck Fuel System - Fill
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Remove
12M, 140M and 160M Motor Graders Hydraulic and Steering System Steering Cylinder
2009/03/09 New Axles are Available for Multi Terrain Loaders {3282, 4159, 4192}
777G Off-Highway Truck Power Train Hydraulic and Transmission Tank (Torque Converter, Hoist, Brake) - Remove
120M, 140M and 160M Motor Graders All Wheel Drive Steering Cylinder and Mounting
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
CP56, CS56, CP64, CS64, CP74 and CS74 Vibratory Compactors C6.6 Engine Supplement Electric Starting Motor - Remove and Install
777D Off-Highway Truck Body Pivot Bearings - Lubricate
14L Motor Grader Machine Systems Blade - Remove and Install