G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Caterpillar


Water Temperature Regulators - Install

Usage:

G3520B GLF


Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
A  1P-0510  Driver Group 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00764442

  1. Use Tooling (A) to install seals (9), if necessary. Ensure that the lip of the seal is toward the inside of the housing.


    Illustration 2g00764347


    NOTICE

    If the water temperature regulator is installed incorrectly, it will cause the engine to overheat.


  2. Install water temperature regulators (8) with the spring upward.


    Illustration 3g00764332

  3. Install a new gasket and position water temperature regulator housing (6) on the engine. Install bolts (7).


    Illustration 4g01340559

  4. Install the gasket and install bolts (5) that fasten pipe (4) to water temperature regulator housing (6).

  5. Install O-ring seals on the tube. Position the gasket on water temperature regulator housing (6).

  6. Install elbow (1). Install bolts (2) on elbow (1).

  7. Install the retainers and bolts (3) that fasten the tube to elbow (2).

  8. Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual for the correct procedure.

Caterpillar Information System:

TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Input Components
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Remove
3500C Marine Auxiliary Engines Speed Control (Switch) - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Output Components
3500C Marine Auxiliary Engines Sensor Supply - Test
3500C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3408C and 3412C Marine Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
C-15, C-16, and C-18 Truck Engines Electric Starting Motor
2007/01/01 Make Sure that the Oil Shields are Installed Correctly {1100}
C6.6 Industrial Engine Maintenance Interval Schedule
3500B Industrial Engines Instrument Panel
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Pump - Remove
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
3500B Industrial Engines Magnetic Pickups - Clean/Inspect
14L Motor Grader<BR> Machine Systems Blade - Remove and Install
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Torque Converter
C-15, C-16, and C-18 Truck Engines Electrical Ground Stud
CX35-P800 Petroleum Transmission and CX35-P800-C18I and CX35-P800-C27I Petroleum Power Train Packages Torque Converter Housing
CX35 On-Highway Transmission Torque Converter Housing
3512C Oil Well Service Engines Overhaul (Top End)
3500C Marine Auxiliary Engines Speed/Timing - Test
3500C Marine Auxiliary Engines Starting - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.