C-15, C-16, and C-18 Truck Engines Caterpillar


Electric Starting Motor

Usage:

C-15 6NZ




Illustration 1g01340321


Illustration 2g01340326

When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... Clockwise

No load conditions at 25°C (77°F)

Speed ... 7643 ± 1683 rpm
Current draw ... 76.5 ± 14.5 amp
Voltage ... 23 V

(1) Tighten the nut on the battery terminal to the following torque. ... 30.5 ± 3.5 N·m (23 ± 2.6 lb ft)

(2) Tighten the nut on the ground terminal to the following torque. ... 30.5 ± 3.5 N·m (23 ± 2.6 lb ft)

(3) Tighten the nut on the ground terminal to the following torque. ... 2.25 ± 0.25 N·m (20± 2 lb in)

(4) Tighten the nut on the switch terminal to the following torque. ... 2.25 ± 0.25 N·m (20 ± 2 lb in)

(5) Tighten the nut on the motor terminal to the following torque. ... 30.5 ± 3.5 N·m (23 ± 2.6 lb ft)

(6) Tighten the nut on the motor frame terminal to the following torque. ... 8 ± 3 N·m (70 ± 27 lb in)

193-8570 Solenoid As

Current consumption at 25°C (77°F)

Pull-in windings at 20V ... 57 Amp
Hold-in windings at 20V ... 16 Amp

Caterpillar Information System:

C-15, C-16, and C-18 Truck Engines Electric Starting Motor
2007/01/01 Make Sure that the Oil Shields are Installed Correctly {1100}
C6.6 Industrial Engine Maintenance Interval Schedule
3500B Industrial Engines Instrument Panel
2007/02/01 New Fuel Pressure Regulators are Now Available {1715}
2007/02/05 New Fuel Pressure Regulators are Now Available {1715}
2013/02/27 New Fuel Pressure Regulators are Now Available {1715}
2008/02/11 The Heavy Pistons are Cancelled {1214, 1225}
3500C Marine Auxiliary Engines Prelubrication - Test
3500C Marine Auxiliary Engines Injector Solenoid - Test
C4.4 (Mech) Industrial Engine Piston Cooling Jet
TH55FT-E70 and TH55FT-E90 Petroleum Transmissions Torque Converter
3408C and 3412C Marine Engines Electric Starting Motor
3500C Marine Auxiliary Engines Sensor Signal (PWM) - Test
3500C Marine Auxiliary Engines Sensor Supply - Test
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Output Components
3500C Marine Auxiliary Engines Speed Control (Switch) - Test
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Remove
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Monitoring System Input Components
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Temperature Regulators - Install
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Water Pump - Remove
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
3500B Industrial Engines Magnetic Pickups - Clean/Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.