Flywheel
Show/hide table
 | |
| Illustration 1 | g01749838 |
(1) Apply 4C-5599 Anti-Seize Compound carefully to the bore of the crankshaft adapter.
Note: The flywheel gear (2) should not slip, when the drive adapter (3) is fixed and the tangential force of 10479 N (2360 lb) is applied to the flywheel gear.
Note: Before tightening three bolts (4) , align the holes for the bolts. After tightening, apply a thin stripe of paint on one side of the bolt heads and the washer plate (5) .
Caterpillar Information System:
3500C Marine Auxiliary Engines Direct Fuel Control Mode - Test
3500C Marine Auxiliary Engines Cat Data Link - Test
CX35 On-Highway Transmission Gear Pump (Transmission Charging)
CX35 On-Highway Transmission Gear Pump (Transmission Charging)
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
C4.4 Marine Generator Set Stopping the Engine - Protection and Paralleling Unit (PPU) Control Panel and Marine Certification Society (MCS) Control Panel (if equipped)
3500C Marine Auxiliary Engines CAN Data Link - Test
C4.4 (Mech) Industrial Engine Crankcase Breather
C4.4 (Mech) Industrial Engine Engine Oil Pan
C4.4 (Mech) Industrial Engine Cylinder Block
C4.4 (Mech) Industrial Engine Gear Group (Front)
C4.4 (Mech) Industrial Engine Turbocharger
2007/02/12 A New Pump is Used for the Hydrax System {1307}
CX35 On-Highway Transmission Torque Converter
3500C Marine Auxiliary Engines Electrical Power Supply - Test
CX35 On-Highway Transmission Transmission Covers
3500C Marine Propulsion Engines Welding on Engines with Electronic Controls
3500C Marine Auxiliary Engines Emergency Stop - Test
3500C Marine Auxiliary Engines Emergency Stop (Remote) - Test
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Exhaust Manifold - Remove
2007/05/14 New Circuit Breakers Are Now Available {1420}
3500B Industrial Engines Maintenance Recommendations
3500C Marine Auxiliary Engines Sensor Signal (Analog, Active) - Test
3500C Marine Auxiliary Engines Engine Control Switch - Test