3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Caterpillar


Engine Wiring Information

Usage:

3054E 304
接线示意图会定期修订。 接线示意图会随配线线束的更新更改。 对于最新的信息资料,一定要检查示意图的修订号。 应使用具有最新修订号的示意图。


图 1g01326122

带 31 针机器接口接头的发动机的喷油泵和 ECM 电源的典型示意图




图 2g01326124

带 70 针机器接口接头的发动机的喷油泵和 ECM 电源的典型示意图

注: J1939 CAN 数据链路的每个端子端必须连接有一个 120 欧姆端接电阻器。

注: 数字输出7、8、9、10、11、12、13 和 14 仅适用于 12 V 系统。

线束导线识别

Caterpillar 使用 11 种固定颜色来识别所有导线。 电路号以 25 mm (1 in) 间隔压印在导线上。 表 1列出了这些导线颜色和颜色代码。

表 1
线束导线的颜色代码    
颜色代码     彩色     颜色代码     彩色    
BK     黑色     GN     绿色    
BR     棕色     BU     蓝色    
RD     红     PU     紫色    
或者     橙色     GY     灰色    
YL     黄色     WH     白色    
        PK     粉红色    

比如,示意图上的 F702-GN 的导线识别号码表示一根绿色导线,其电路号为 F702。 F702-GN 识别 8 V 油门传感器的电源。

注: 更换线束时,务必使用相同直径规格和色码的导线。

机器接口接头

提供两种类型的机器接口接头。 一种类型的接头有 31 个触针,另一种有 70 个触针。

图 1、图 5 和图 6 显示 31 针机器接口接头的布局。

图 2、图 3 和图 4 显示 70 针机器接口接头的布局。

注: 有些带 70 针机器接口接头的发动机不具有以下导线连接:35, 50, 53, 54, 60, 62, 63, 64 和 67。




图 3g01624789



图 4g01625040



图 5g01335211



图 6g01335344

表 2 显示从带 70 针接头的发动机型号转换为带 31 针接头的发动机型号。

表 2
机器接口接头触针数    
70 针     31 针    
2     13    
3     14    
4     15    
5     16    
10     22    
11     24    
12     10    
13     11    
16*     27*    
17     14    
18     18    
19     22    
20     25    
22     23    
23     12    
25     19    
28     21    
29     29    
30     26    
31     6    
36     9    
37     28    
39     11    
42     3    
43     7    
44     17    
45     20    
46     13    
52     30    
56     1    
61     31    
68     2    
70     5    
* 这些连接没有用在部分发动机型号上。    

Caterpillar Information System:

3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Sensors and Electrical Connectors
C13 and C15 On-highway Engines Component Location
G3516C, G3516E, and G3512E Generator Set Engines Integrated Temperature Sensing Module - Test
G3516C, G3516E, and G3512E Generator Set Engines Indicator Lamp - Test
G3516C, G3516E, and G3512E Generator Set Engines Ignition Secondary - Test
C15 and C18 Petrolem Generator Set Engines Oil Contains Fuel
G3516C, G3516E, and G3512E Generator Set Engines Turbocharger Compressor Bypass - Test
G3516C, G3516E, and G3512E Generator Set Engines Throttle Actuator - Test
G3516C, G3516E, and G3512E Generator Set Engines Starting - Test
C13 and C15 On-highway Engines Crankcase Fumes Disposal Tube Has Oil Draining
C13 and C15 On-highway Engines Coolant Contains Oil
C11 and C13 Engines Fan Drive
2006/11/20 Prevent Freezing of the Cooling System During Shipping and Storage {1063}
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Factory Passwords
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Flash Programming
TA22-4WD Agricultural Transmission Relief Valve (Transmission Lubrication)
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines System Configuration Parameters
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Noise - Noisy Operation
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Alternator Will Not Charge - Charging Problem
2006/12/25 New Software is Used {1902, 7620}
C13 and C15 On-highway Engines Oil Contains Coolant
G3516C, G3516E, and G3512E Generator Set Engines ECM - Replace
G3516C, G3516E, and G3512E Generator Set Engines Generator Output Power Sensor - Set
G3516C, G3516E, and G3512E Generator Set Engines Timing - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.