Software for Track Feller Bunchers Has Been Updated {1408, 7490, 7620}
- Track Feller Buncher:
- 1090 (S/N: BZJ1-206)
- 1190 (S/N: BZK1-2161)
- 1190T (S/N: BZL1-2210)
- 1290T (S/N: BZM1-10205)
- 1390 (S/N: B3F1-205)
- 511 (S/N: 5111-286)
- 521 (S/N: 5211-314)
- 522 (S/N: 5221-244)
- 532 (S/N: 5321-176)
- 541 (S/N: 5411-210)
- 551 (S/N: 5511-116)
- 552 (S/N: 5521-145)
- TK711 (S/N: 1011-276)
- TK721 (S/N: 1021-367)
- TK722 (S/N: 1031-467)
- TK732 (S/N: 1041-549)
- TK741 (S/N: 2021-233)
- TK751 (S/N: 3011-261)
- TK752 (S/N: 3021-425)
Note: The graphic has been replaced for this article.
Application software for 500 series Track Feller Bunchers and TK700 series Track Feller Bunchers has been updated. The updated software will prevent "zero point" errors and "reposition lockout lever" errors on machines that are equipped with the following joystick controls:
- 235-5727 Joystick Control Gp
- 272-7087 Joystick Control Gp
- 272-7088 Joystick Control Gp
- 272-7089 Joystick Control Gp
- 283-2393 Joystick Control Gp
- 283-2394 Joystick Control Gp
- 283-2395 Joystick Control Gp
These errors may occur when the joystick is physically centered in the neutral position. Refer to Table 1 and Table 2 for the part number of the updated software for your machine.
Show/hide table
Illustration 1 | g01343828 |
When you send the application software to the IQAN system, ensure that the program is using the values from the new application software. Refer to Illustration 1.
Show/hide table
Track Feller Buncher Application Software (MDM)     | ||||
Model     | Configuration (Version)     |
Current Software Version     | Part Number of Current Application Software     | Part Numbers of Noncurrent Application Software     |
TK ZTS     |
Felling (V2)     | 2.5     | 302-5741     | 283-3551 269-2153 262-4390 256-9818     |
Processor (V2) | 1.4     | 302-5759     | 283-3562 256-9820     |
|
Prentice ZTS     |
Felling (V2)     | 2.5     | 302-5742     | 283-3552 269-2154 262-4391 260-0887     |
Processor (V2) | 1.4     | 302-5760     | 283-3563 256-9821     |
|
TK ZTS Spanish/English     |
Felling (V3)     | 3.5     | 302-5743     | 289-0296 283-3553 269-8865 260-0887     |
Intermittent Saw (V3) | 1.3     | 302-5753     | 281-4673 283-3557 260-0873     |
|
Processor (V3) | 2.3     | 302-5761     | 288-0510 283-3564 260-0879     |
|
TK ZTS French/English     |
Felling (V3)     | 3.5     | 302-5744     | 283-3554 269-8866 260-0888     |
Felling (V3) (Patterns 9-11) |
3.5     | 302-5747     | 296-7698     | |
Intermittent Saw (V3) | 1.3     | 302-5754     | 281-4674 283-3558 260-0874     |
|
Processor (V3) | 2.3     | 302-5762     | 288-0509 283-3565 260-0880     |
|
Prentice ZTS Spanish/English     |
Felling (V3)     | 3.5     | 302-5745     | 289-0297 283-3556 269-8868 260-0890     |
Intermittent Saw (V3) | 1.3     | 302-5755     | 281-4675 283-3560 260-0884     |
|
Processor (V3) | 2.3     | 302-5763     | 288-0512 283-3566 260-0881     |
|
Prentice ZTS French/English     |
Felling (V3)     | 3.5     | 302-5746     | 289-0298 283-3556 269-8868 260-0890     |
Intermittent Saw (V3) | 1.3     | 302-5756     | 281-4676 283-3561 260-0885     |
|
Processor (V3) | 2.3     | 302-5764     | 288-0511 283-3567 260-0882     |
|
TK FTS Spanish/English     |
Felling     | 1.4     | 302-5748     | 283-3568 260-0891 260-0869     |
Intermittent Saw | 1.4     | 302-5757     | 283-3572 260-0896     |
|
TK FTS French/English     |
Felling     | 1.4     | 302-5749     | 283-3569 260-0893     |
Felling (Pattern 8) |
1.4     | 302-5752     | 287-2640     | |
Intermittent Saw | 1.4     | 302-5758     | 281-4677 283-3573     |
|
Prentice FTS Spanish/English     |
Felling     | 1.4     | 302-5750     | 283-3570 270-8604     |
Prentice FTS French/English     |
Felling     | 1.4     | 302-5751     | 283-3571 270-8605     |
Show/hide table
Track Feller Buncher Application Software (MDL)     | ||||
Model     | Configuration (Version)     |
Current Software Version     | Part Number of Current Application Software     | Part Numbers of Noncurrent Application Software     |
500 Series     | N/A     | 2.6     | 302-5766     | 288-5922 296-4244     |
Prentice     | N/A     | 2.6     | 302-5765     | 290-2323     |
Caterpillar Information System:
777E, 777F and 777G Off-Highway Truck Electric Drive Pump (Prelubrication) - Remove and Install
735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166} 735, 740 and 740 EJECTOR Articulated Trucks - Noise from the Power Train Is Sometimes Part of Normal Operation{3030, 3073, 3157, 3166}
C13 and C15 On-highway Engines Coolant Contains Oil
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 1933 - FMI 04
C11 and C13 Engines Fan Drive
14M Motor Grader Engine Supplement Fuel Priming Pump and Water Separator - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Pan - Remove - C175-16
777D and 777E Off-Highway Truck Air System and Brakes Temperature Sensor (Torque Converter Oil)
14M Motor Grader Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines Self-Diagnostics
16M Motor Grader Engine Supplement Engine Oil Filter Base - Assemble
16M Motor Grader Engine Supplement Engine Oil Filter Base - Disassemble
14M Motor Grader Engine Supplement Refrigerant Compressor - Remove and Install
PL61 Pipelayer and D6K Track-Type Tractor MID 039 - CID 2211 - FMI 03
3126B Engine for Caterpillar Built Machines Analog Sensor Supply Circuit - Test
777G Off-Highway Truck Power Train Transmission Hydraulic Control - Disassemble
C15 and C18 Petrolem Generator Set Engines Oil Contains Fuel
RM-300 Reclaimer Mixer Machine Systems Hydraulic Lines (Emulsion Pump)
777D and 777E Off-Highway Truck Air System and Brakes Operational Checks
777D and 777E Off-Highway Truck Air System and Brakes Brake Oil Overheating Troubleshooting
RM-300 Reclaimer Mixer Machine Systems Water and Emulsion Lines
777D and 777E Off-Highway Truck Air System and Brakes Relief Valve (Brake Oil Cooler) - Test and Adjust
450E Backhoe Loader Engine Starting with Starting Aid
3126B Engine for Caterpillar Built Machines Injection Actuation Pressure Sensor - Test