2007/08/27 Caterpillar


An Improved Turbocharger Housing is Used {1052, 1053}

Usage:

3512B 2AF
Engine:
3512B (S/N: 2AF1-UP; PWG1-UP; S2H1-UP; S2J1-UP; S2L1-UP; S2M1-UP; 7HM1-UP; 8EM1-UP; 4TN1-UP; 3ZW1-UP; 2EZ1-UP; BRC1-UP)
3516 (S/N: 3SS1-UP)
3516B (S/N: 8KN1-UP; S2S1-UP; S2T1-UP; CBN1-UP; S2Z1-UP)
Engine News SEBD9449, 25 June 2007, "An Improved Turbocharger Housing is Used". Disregard this article. Refer to the following article.

Description of Change: A new turbocharger group is now used on the above engines. The new turbocharger has a seal that is added between the turbine housing and the bearing housing in order to improve the sealing of the joint.

Adaptable To: The new turbocharger group is a direct replacement for the old turbocharger group. The new turbocharger groups are adaptable to the engines that are listed above back to first production. The new 289-4079 Seal is used on all of the turbochargers that are listed in Table 1 below.

Table 1
Part Numbers for the Turbochargers    
Serial Number Prefix     Former Part Number for the Turbocharger Group     New Part Number for the Turbocharger Group     New Part Number for the Turbocharger Housing    
S/N:2AF00676     188-4623     299-4611     294-7492    
188-4625 303-8128     289-4078    
S/N:4TN00868     188-4623     299-4611     294-7492    
188-4630 289-0379    
S/N:7HM00271     188-4623     299-4611    
188-4625 303-8128     289-4078    
178-3662 289-0384     294-4527    
S/N:S2L00681     188-4623     299-4611     294-7492    
188-4630 289-0379    
S/N:S2M00171     188-4623     299-4611    
188-4625 303-8128     289-4078    
178-3662 289-0384     294-4527    
S/N:S2T00105     188-4623     299-4611     294-7492    
188-4626 289-0386     289-4078    
S/N:BRC00168     188-4621     299-4614
S/N:2EZ00376    
176-3231 303-8128    
S/N:8EM00546     188-4621     299-4614
188-4630 289-0379     294-7492    
S/N:S2H00315     188-4621     299-4614     289-4078    
188-4630 289-0379     294-7492    
S/N:S2J00491     188-4621     299-4614     289-4078    
188-4624 289-0380     258-6591    
244-3125 174-7082
S/N:3SS00324     188-4621     299-4614     289-4078    
S/N:8KN00588    
S/N:S2S00309    
S/N:CBN00494    
S/N:S2Z00183    
S/N:3ZW00832     188-4629     285-2057     297-2416    
247-7589
272-8186 289-0383     174-7082    
S/N:PWG00202     188-4622     289-8785     290-2484    
251-1277

Note: If a leak is suspected in a turbocharger, refer to Special Instruction, REHS2997, "Inspecting the Turbocharger for Exhaust Leaks".

Caterpillar Information System:

3612 and 3616 Engines Piston and Connecting Rods - Install - Hydraulic Tensioned Rod Bolts
3612 and 3616 Engines Piston and Connecting Rods - Remove
2006/10/09 A New Torque Specification of Marine Engines Is Now Available {1156}
2006/10/23 New Engine Software for AGCO Tractors Is Now Used {1902, 7620}
C175-16 Locomotive Engine Coolant Temperature Sensor - Test
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Specifications
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Status Messages
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Troubleshooting
2006/10/16 An Improved Exhaust Gasket Is Available {1071, 7555}
C280-12 and C280–16 Marine Engines Valve Mechanism - Install
C280-12 and C280–16 Marine Engines Valve Mechanism - Remove
C27 Engines for Track-Type Tractors Engine Speed/Timing Sensor - Calibrate
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Air Filter - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Battery - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Flywheel - Clean
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Oil - Change
3512B Marine Auxiliary Engine Model View Illustrations
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Oil Level - Check
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Sight Gauge - Clean
C280-12 and C280–16 Marine Engines Crankshaft Main Bearings - Remove
3606 and 3608 Engines Crankshaft Main Bearings - Remove
C280-6 and C280-8 Engines Crankshaft Main Bearings - Remove
345C Excavator and 345C Material Handler Machine System Specifications Swing Motor
C280-12 and C280–16 Marine Engines Crankshaft Main Bearings - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.