773F, 773F OEM, 777F and 777F OEM Off-Highway Trucks and 775F and 775F OEM Quarry Truck Vital Information Management System (VIMS) Caterpillar

Illustration 1	g01307247

The following screen will now be displayed.

Illustration 2	g01307248

The "Service Mode" menu option is entered by selecting "Service Mode" from the "Home Menu". Press the up button or the down button until the "Service Mode" is highlighted in order to select the menu. Then, press the "OK" button in order to select the "Service Mode" menu. The "Home Menu" can be displayed from any screen by pressing the "Home" button. The "Service Mode" menu option allows the user to enable the service mode. The option also disables the service mode. The password entry screen will appear if the password has been entered in Cat ET. The "Advisor" will enter the service mode after the password has been entered correctly.

A Service Tool must be used to program the password into the display. The password cannot be changed within the Advisor.

Configuration of the Password in Cat ET

1. Connect Cat ET to the machine. Select the Monitor ECM.

Show/hide table



Illustration 3	g01529793
A typical screen is shown.

2. Select "Configuration" from the "Service" menu.

Show/hide table



Illustration 4	g01529795
A typical screen is shown.

3. Select "Service Mode Enable Code" and click the "Change" button. A screen will appear for entering a password.

Show/hide table



Illustration 5	g01529798
A typical screen is shown.

4. Enter a password.

Show/hide table



Illustration 6	g01529799
A typical screen is shown.

5. The password is shown in Cat ET.