D6K Track-Type Tractor Machine Systems Caterpillar


Bottom Guard - Remove

Usage:

D6K LGP DHA

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     180-3034     Jack Stand Gp     2    
B     1U-7505     Hydraulic Jack     1    

Note: The accumulation of debris inside the bottom guards may add significantly to the weight of the bottom guards. Use extreme caution when you are removing the bottom guards.




    Illustration 1g01302152

  1. Position Tooling (A) under blade (1) .



    Illustration 2g01302158

  1. Position Tooling (B) under front bottom guard (2). The weight of front bottom guard (2) is approximately 74 kg (163 lb). Remove bolts (3) and the washers. Use Tooling (B) in order to lower and remove front bottom guard (2) from the machine.



    Illustration 3g01302166

  1. Remove two bolts (4) and the washers from center bottom guards (5) and (6) .



    Illustration 4g01302170

  1. Position Tooling (B) under center bottom guard (6). The weight of center bottom guard (6) is approximately 42 kg (92 lb).

  1. Remove bolts (7) and the washers from center bottom guard (6). Use Tooling (B) in order to lower and remove center bottom guard (6) from the machine.

  1. Repeat Steps 4 and 5 in order to remove center bottom guard (5) from the machine.



    Illustration 5g01302260

  1. Remove two bolts (8) from rear bottom guard (9) .



    Illustration 6g01302279

  1. Position Tooling (B) under rear bottom guards (9) and (11). The combined weight of rear bottom guards (9) and (11) is approximately 60 kg (132 lb).

  1. Remove bolts (10) and the washers from rear bottom guards (9) and (11). Use Tooling (B) in order to lower and remove rear bottom guards (9) and (11) from the machine.

Caterpillar Information System:

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System System Schematic
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) - Install
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) - Install
D7G and D7G Series II Track-Type Tractors Power Train Gear Pump (Flywheel Scavenge) - Install
AD55B Underground Articulated Truck Battery Electrolyte Level - Check
AD55B Underground Articulated Truck Backup Alarm - Test
AD55B Underground Articulated Truck Sampling Interval and Location of Sampling Valve
AD55B Underground Articulated Truck Filter and Screen Locations
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Connecting Rod Bearings - Remove - Connecting rods in position
657G Wheel Tractor-Scraper Wheel Tractor Power Train Scavenge Pump and Mounting (Flywheel) - Remove
D6K Track-Type Tractor Machine Systems Bottom Guard - Install
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather - Remove and Install - Turbocharged Engines
Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050} Installation of 6SU (S/N: D1Y; S6A; ECA; S6D; JCE; S6S; B6D; B6A) Bulldozer{6050}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove
C11 and C13 Engines and 14M and 16M Motor Graders CAN Data Link - Test
2006/09/18 A New Alternator Support and a New Belt are Used {1397, 1405}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.