Gear Pump (Flywheel Scavenge) - Install
安装步骤
- 安装齿轮 (5) 和螺母 (4) 。 拧紧螺母 (4) 至扭矩为 55 ± 6 N·m (40 ± 4 lB ft)。
Show/hide table
 | |
| 图 1 | g01303613 |
- 安装飞轮回油泵 (2) 和螺栓 (3) 。 连接软管组件 (1) 。
Show/hide table
 | |
| 图 2 | g01301777 |
End By: 安装后底部防护罩。 请参阅 解体与组装, "底部防护罩 - 安装"。
Caterpillar Information System:
AD55B Underground Articulated Truck Battery Electrolyte Level - Check
AD55B Underground Articulated Truck Backup Alarm - Test
AD55B Underground Articulated Truck Sampling Interval and Location of Sampling Valve
AD55B Underground Articulated Truck Filter and Screen Locations
AD55B Underground Articulated Truck Capacities (Refill)
AD55B Underground Articulated Truck Tire Shipping Pressure
G3520C and G3520E Generator Set Engines Turbocharger Turbine Temperature Is Low
AD55B Underground Articulated Truck Lifting and Tying Down the Machine
AD55B Underground Articulated Truck Stopping the Engine
AD55B Underground Articulated Truck Stopping the Machine
G3600 Engines Symptom Troubleshooting
G3600 Engines Programmable Parameters
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Inlet) - Install
D6G Series II Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) - Install
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for D6R Series II Track-Type Tractor CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System System Schematic
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 55 Amp Alternator
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install - 65 Amp and 85 Amp Alternators
D6K Track-Type Tractor Machine Systems Bottom Guard - Remove
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Assemble
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Mounting and Dismounting
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Camshaft - Disassemble
Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004} Installation Instructions for the 290-3531 Ride Control Ar (KIT){5004}