525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Caterpillar


Transmission Lubrication

Usage:

525C 525
All of the following components in the transmission are lubricated by pressure oil: clutches, gears and bearings. After the oil has been cooled by the oil cooler, the oil flows to the transmission case. The oil flows through internal passages in the transmission case to a passage in each transmission clutch shaft. Oil flows through cross-drilled holes in each transmission clutch shaft, to the bearings, and to the clutches, and to the gears.

Caterpillar Information System:

D7G2 Track-Type Tractor Power Train Transmission Control Valve - Test and Adjust
D7G2 Track-Type Tractor Power Train Steering Control Valve - Test and Adjust
D7G2 Track-Type Tractor Power Train Relief Valve (Torque Converter Outlet) Pressure - Test and Adjust
D7G2 Track-Type Tractor Power Train Lubrication Relief Valve (Transmission) Pressure - Test
D7G2 Track-Type Tractor Power Train Sequence Relief Valve - Test and Adjust
C11 and C13 Engines and 14M and 16M Motor Graders Diagnostic Trouble Code List
D7G2 Track-Type Tractor Power Train Pressure Taps
C11 and C13 Engines Belt Tensioner
D6G Series II Track-Type Tractor Engine Supplement Fan and Fan Drive - Remove and Install
D7G2 Track-Type Tractor Power Train Visual Inspection
D6G Series II Track-Type Tractor Engine Supplement Hood - Remove and Install
D7G2 Track-Type Tractor Power Train Location of Components (Power Train)
D7G2 Track-Type Tractor Power Train Brake System - Test and Adjust
D7G2 Track-Type Tractor Power Train Brake Hydraulic Control Mechanisms - Steering Brake Group and Parking Brake Control Group
AccuGrade® Laser (CD610) Display Description (Dual Mast System)
AccuGrade® Laser (CD610) Display Description (Single Mast System)
AccuGrade® Laser (CD610) Configuration (Dual Mast System)
AccuGrade® Laser (CD610) Setting the Reference Elevation (Dual Mast System)
AccuGrade® Laser (CD610) Troubleshooting
AccuGrade® Laser (CD610) General Information
AccuGrade® Laser (CD610) Laser Transmitter Setup Information (Dual Mast System)
AccuGrade® Laser (CD610) Setting the Reference Elevation (Single Mast System)
AccuGrade® Laser (CD610) Laser Transmitter Setup Information (Single Mast System)
AccuGrade® Laser (CD610) Laser Transmitter Precise Alignment (Dual Mast System)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.