2006/09/01 Caterpillar


277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}

Usage:

769C 01X
Caterpillar Products:
  • All



  • Illustration 1g01296312

    The 277-4734 Bypass Harness Assembly adapts the 217-0113 Main Harness Assembly to ADEM IV:E2 electronic control modules. When used together, the harness assemblies allow Cat ET to communicate with all Caterpillar products that are equipped with ADEM IV:E2 electronic control modules.

    Caterpillar Information System:

    12M Motor Grader Scarifier Teeth - Inspect/Replace - If Equipped
    C280-12 and C280–16 Marine Engines Idler Gears (Rear) - Install
    12M Motor Grader Scarifier Lift Link Socket - Lubricate - If Equipped
    C280-12 and C280–16 Marine Engines Idler Gears (Rear) - Remove
    307B, 311–330 B-D Series, 345–5090 B and C Series and M312-M322 A-D Series Excavators Bucket - Remove and Install
    Using the Map Adjustment Feature{1901, 1902, 7620} Using the Map Adjustment Feature{1901, 1902, 7620}
    TA22 Transmission Relief Valve - Remove and Install - Lube Relief Valve
    C13 and C15 On-highway Engines Indicator Lamp - Test
    C13 and C15 On-highway Engines Auxiliary Brake - Test
    TA22-4WD Agricultural Transmission Transmission Suction Screen - Clean
    3176C and 3196 Engines for Caterpillar Built Machines Fuel Priming Pump
    C7 and C9 On-Highway Engines Retarder Does Not Activate
    C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Lines
    C1.5 and C2.2 Engines for Caterpillar Built Machines Turbocharger
    C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Oil Lines
    C7 Engines for Caterpillar Built Machines Water Temperature Regulator
    C7 Engines for Caterpillar Built Machines Water Temperature Regulator
    12M Motor Grader Work Tool Lift - Lubricate
    320D and 323D Excavators Machine System Specifications Pilot Valve (Joystick)
    C7 Engines for Caterpillar Built Machines Crankshaft
    C15 and C18 Petrolem Generator Set Engines ECM Software - Install
    C1.5 and C2.2 Engines for Caterpillar Built Machines Fan Drive
    390F Excavator Machine Systems Swing Drive - Disassemble
    C7 Engines for Caterpillar Built Machines Crankshaft Seals
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.