UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Caterpillar


Attachments

Usage:

UPS 250 APZ


Table 1
UPS 300 Ethernet Field Installable Attachments 
Part Number  Module System  Reference 
248-8796  SMS  Factory Installed Attachment 203-4292 
255-6646  MMS, 115 VAC, with transformer  Factory Installed Attachment 203-4293 
255-6647  MMS, 230 VAC, with transformer  Factory Installed Attachment 228-4089 
255-6648  MMS, 115 VAC, w/o transformer  Factory Installed Attachment 228-4090 
255-6649  MMS, 230 VAC, w/o transformer  Factory Installed Attachment 228-4094 

Table 2
Field Installable Attachments For Version 2.4 Design and Up 
Part Number  Module System  Reference 
263-3454  Internal, SMS, 115 VAC  Factory Installed Attachment 206-8852 
263-3453  Internal, SMS, 230 VAC  Factory Installed Attachment 206-8854 
263-3459  Internal, MMS, 115 VAC  Factory Installed Attachment 203-3972 
263-3330  Internal, MMS, 230 VAC  Factory Installed Attachment 203-3973 
263-3458  External, SMS, 115 VAC  Factory Installed Attachment 203-4222 
263-3721  External, SMS, 230 VAC  Factory Installed Attachment 203-4295 
263-3457  External, MMS, 115 VAC  Factory Installed Attachment 203-3974 
263-3455  External, MMS, 230 VAC  Factory Installed Attachment 203-3975 

Table 3
Upgrades to UPS 
P/N  Description of Upgrade 
245-0559  The Magnetic RPS Sensor Assembly can be upgraded to the Optical RPS Sensor Assembly design. 
207-8751  The Hall Effect Sensor can be upgraded to the Load Cell Sensor with new bearings. 
224-3145  The Non-Load Cell Static Drain can be upgraded to the Load Cell Static Drain 

Caterpillar Information System:

C27 and C32 Generator Set Engines Engine - Install
C175-16 Locomotive Engine Pressure Sensor
C27 and C32 Generator Set Engines Engine - Remove
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Install
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Remove
C175-16 and C175-20 Generator Set Engines Temperature Sensor
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/08/01 New Oil Pan is Now Available {1302}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
C15 Petroleum Generator Set Engines Water Lines
2007/01/15 A New Speed-Timing Sensor is Available {1912}
Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901} Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901}
325D and 329D Excavators Hydraulic System General Information
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Cabinet Hardware)
C15 and C18 Petrolem Generator Set Engines Welding Precaution
C15 and C18 Petrolem Generator Set Engines Diagnostic Capabilities
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Door
C15 and C18 Petrolem Generator Set Engines Programmable Parameters
G3520C and G3520E Generator Set Engines Coolant Temperature Is High
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Front Screen and Air Filter
G3520C and G3520E Generator Set Engines Coolant Temperature Is Low
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.