Temperature Sensor
Show/hide table
| 图 1 | g01560217 |
注: 将 4C-5599 防粘结剂 涂敷在温度传感器总成的螺纹上。
(1) 温度传感器总成的最终安装扭矩 ... 45 ± 5 N·m (33 ± 4 lb ft)
工作温度 ... −40 至 850 °C (−40 至 1562 °F)
工作电压 ... 7.5 至 8.5 VDC
输出类型 ... PWM（脉冲宽度调制）
输出频率 ... 500 ± 100 Hz
中等 ... 排气
Caterpillar Information System:
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/08/01 New Oil Pan is Now Available {1302}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908} Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908}
3612 and 3616 Engines Fuel Priming Pump - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Disassemble
3612 and 3616 Engines Fuel Priming Pump - Remove
C32 Power Module Air Inlet Filter - Check
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Remove
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Install
C27 and C32 Generator Set Engines Engine - Remove
C175-16 Locomotive Engine Pressure Sensor
C27 and C32 Generator Set Engines Engine - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Attachments
C15 Petroleum Generator Set Engines Water Lines
2007/01/15 A New Speed-Timing Sensor is Available {1912}
Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901} Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901}
325D and 329D Excavators Hydraulic System General Information
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Cabinet Hardware)
C15 and C18 Petrolem Generator Set Engines Welding Precaution