Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 189-0410 | 钩环组件 | 2 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 将工具 (A) 和适当的起吊设备连接到冷却组件 (10) 上。 冷却组件 (10) 的重量约为 544 kg (1200 lb)。
Show/hide table
 | |
| 图 1 | g01290940 |
- 安装冷却组件 (10) 。 安装螺栓 (11) 。 对另一侧重复此操作。
Show/hide table
 | |
| 图 2 | g01290941 |
- 将软管组件 (9) 连接到燃油冷却器 (7) 上。
Show/hide table
 | |
| 图 3 | g01290939 |
- 将软管组件 (8) 连接到燃油冷却器 (7) 上。
Show/hide table
 | |
| 图 4 | g01290934 |
- 连接底部后冷器管 (6) 。 连接底部散热器软管 (5) 。
Show/hide table
 | |
| 图 5 | g01290930 |
- 连接顶部后冷器管 (4) 。
Show/hide table
 | |
| 图 6 | g01290917 |
- 连接顶部散热器软管 (3) 。
Show/hide table
 | |
| 图 7 | g01290916 |
- 连接底部后冷器管 (2) 。
Show/hide table
 | |
| 图 8 | g01290915 |
- 安装卡箍 (1) 。 对另一侧重复此操作。
Show/hide table
 | |
| 图 9 | g01290908 |
- 向冷却系统加注冷却液。 请参阅操作和保养手册, "冷却系统冷却液（ELC）- 更换"。
End By: 安装风扇。 请参阅 拆解和组装, "风扇 - 拆卸和安装"。
Caterpillar Information System:
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/08/01 New Oil Pan is Now Available {1302}
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908} Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908}
3612 and 3616 Engines Fuel Priming Pump - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Disassemble
3612 and 3616 Engines Fuel Priming Pump - Remove
C32 Power Module Air Inlet Filter - Check
C15 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
C175-16 and C175-20 Generator Set Engines Temperature Sensor
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Remove
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Install
C27 and C32 Generator Set Engines Engine - Remove
C175-16 Locomotive Engine Pressure Sensor
C27 and C32 Generator Set Engines Engine - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Attachments
C15 Petroleum Generator Set Engines Water Lines
2007/01/15 A New Speed-Timing Sensor is Available {1912}
Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901} Incorrect Programming of the "Pulses Per Mile" Parameter in CAT ET Configuration Screen{0785, 1901}
325D and 329D Excavators Hydraulic System General Information
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Cabinet Hardware)