New Oil Pan is Now Available {1302}
- Engine:
- C9 (S/N: 9DG566-7671)
Description of Change: There is a new oil pan that is now available. The new oil pan is manufactured from aluminum. The new oil pan will increase the strength of the oil pan and the stability of the oil pan.
Adaptable To: The current 210-0191 Oil Pan and 220-5710 Oil Pan have been replaced by 284-6025 Oil Pan. The new oil pan can be used on the above listed engines.
The new oil pans can be used on engines that have a front sump or engines that have a rear sump. There are new parts that are required in order to properly install the new oil pan.
The parts for engines with a rear sump are identified in Table 1.
Show/hide table
| Quantity | Description | Part Number |
| 1 | Tube As | 212-7799 |
| 1 | Engine Oil Lines Gp | 192-2833 |
| 1 | Oil Pan Gasket | 190-6114 |
| 32 | Bolt | 6V-3918 |
| 32 | Hard Washer | 9M-1974 |
Show/hide table
| Quantity | Description | Part Number |
| 1 | Tube As | 212-7798 |
| 1 | Engine Oil Lines Gp | 192-2832 |
| 1 | Oil Pan Gasket | 190-6114 |
| 32 | Bolt | 6V-3918 |
| 32 | Hard Washer | 9M-1974 |
Note: There are some chassis that require the crossmember to be loosened in order to install the new oil pan.
Caterpillar Information System:
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Power Train Electronic Control System Transmission Control (Shift Solenoid) - Calibrate
Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908} Caterpillar Logic Control Governor One (LCG1) and Caterpillar Logic Control Governor Two (LCG2){1264, 1908}
3612 and 3616 Engines Fuel Priming Pump - Install
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Assemble
TH48-E70 Oil/Gas Transmission and TH48-E70-C27 and TH48-E70-C32 Package Torque Converter - Disassemble
3612 and 3616 Engines Fuel Priming Pump - Remove
C32 Power Module Air Inlet Filter - Check
C15 On-Highway Engine Valve Mechanism Cover Base - Remove and Install
C27 and C32 Generator Set Engines Fan Guard - Remove and Install
C27 and C32 Generator Set Engines Fan - Remove and Install
C27 and C32 Generator Set Engines Belt Guard - Remove and Install
C32 Power Module Heat Shield - Inspect/Replace
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Remove
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24 A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
C27 and C32 Generator Set Engines Cooling System Package (Radiator, Aftercooler, Fuel Cooler) - Install
C175-16 and C175-20 Generator Set Engines Temperature Sensor
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Remove
C280-12 and C280–16 Marine Engines Fuel Pressure Control Valve - Install
C27 and C32 Generator Set Engines Engine - Remove
C175-16 Locomotive Engine Pressure Sensor
C27 and C32 Generator Set Engines Engine - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Attachments
C15 Petroleum Generator Set Engines Water Lines