Machining and Welding Information for Underground Articulated Trucks Caterpillar

Rear Frame

Usage:

AD45B CXM

Dimensi untuk Rangka Belakang

Truk Artikulasi Bawah Tanah AD60, AD55B, dan AD55

Show/hide table




Ilustrasi 1	g01228366
Contoh umum.

Show/hide table

Tabel 1
Dimensi Akhir Alat Berat Rangka Belakang AD60, AD55B, dan AD55
Lokasi	Dimensi	Spesifikasi Material
D1	546,22 + 0,10 - 0,00 mm (21,504 + 0,003 - 0,000 in.)	MS013
D2	546,02 ± 0,026 mm (21,4968 ± 0,0010 in.)	MS013
D3	488,87 ± 0,026 mm (19,247 ± 0,0010 in.)	MS013
D4	489,07 + 0,010 mm - 0,00 (19,254 + 0,0004 - 0,000 in.)	MS013
D5	88,79 ± 0,013 mm (3,496 ± 0,0005 in.)	MS106
L1	601,71 mm (23,689 in.)	MS013
L2	522,19 mm (20,559 in.)	MS013
L3	136,66 mm (5,380 in.)	MS013
L4	44,10 mm (1,736 in.)	MS013

Truk Artikulasi Bawah Tanah AD45B

Show/hide table




Ilustrasi 2	g01255664

Show/hide table

Tabel 2
Dimensi Akhir Alat Berat Rangka Belakang AD45B
Lokasi	Dimensi	Spesifikasi Material
D1	88,798 ± 0,013 mm (3,4960 ± 0,0005 in.)	MS106
D2	420,00 ± 0,05 mm (16,535 ± 0,002 in.)	MS013

Truk Artikulasi Bawah Tanah AD30

Show/hide table




Ilustrasi 3	g01749715

Show/hide table

Tabel 3
Dimensi Akhir Alat Berat Rangka Belakang AD30
Lokasi	Dimensi	Spesifikasi Material
D1	88,798 ± 0,013 mm (3,4960 ± 0,0005 in.)	MS106
D2	319,0 ± 0,05 mm (12,56 ± 0,002 in.)	750 Batang Cekung
L1	482,5 ± 0,25 mm (19,00 ± 0,010 in.)	750 Batang Cekung

Caterpillar Information System:

Load Haul Dump Machine Machining & Welding Information Consumables

D11R Starter Solenoid Connections{1467} D11R Starter Solenoid Connections{1467}

657G Wheel Scraper Power Train Final Drive and Wheel - Install

657G Wheel Scraper Power Train Final Drive and Wheel - Remove

D6K Track-Type Tractor Electrohydraulic Power Train Track Roller

657G Wheel Scraper Power Train Power Train Guard (Transmission) - Remove and Install

2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}

Underground Articulated Trucks Truck Payload Measurement System Service Tools

D7G Series 2 and D7G Series II Track-Type Tractors Condenser (Refrigerant) - Clean

D7G Series 2 and D7G Series II Track-Type Tractors Emissions Certification Film

D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Cap and Strainer - Clean

Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300} Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300}

Machining and Welding Information for Underground Articulated Trucks Front Frame

953D Track-Type Loader Machine Systems Lift Cylinder - Remove and Install

953D Track-Type Loader Machine Systems Piston Pump (Implement) - Remove

953D Track-Type Loader Machine Systems Piston Pump (Implement) - Install

953D Track-Type Loader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Remove

D7G Series 2 and D7G Series II Track-Type Tractors Cutting Edges and End Bits - Inspect/Replace

D7G Series 2 and D7G Series II Track-Type Tractors Battery Disconnect Switch

657G Wheel Tractor-Scraper Machine Systems Steering Control Valve - Remove

D7G Series 2 and D7G Series II Track-Type Tractors Fuses and Circuit Breakers - Replace/Reset

953D Track-Type Loader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Install

657G Wheel Tractor-Scraper Machine Systems Steering Control Valve - Install

D7G Series 2 and D7G Series II Track-Type Tractors Radiator Pressure Cap - Clean/Replace