Track Roller
Show/hide table
 | |
| Illustration 1 | g03423068 |
Show/hide table
| Specification for 240-8933 Track Roller | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 171-5883 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Just before assembly, apply a thin layer of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. |
| 2 | 2 | 1H-8128 O-Ring Seal | During assembly, lubricate two O-ring seals (2) and the mating surface of the bushing (3) with the lubricant that is being sealed. |
| 3 | 2 | 124-8248 Bushing | |
| 4 | 2 | 217-6359 Collar | Lubricate the shaft (5) in the seating surface of the collar (4) with the lubricant that is being sealed. |
| 5 | 1 | 217-6358 Shaft | |
| 6 | 1 | - | The plug must not be recessed below the surface of the 6Y-0454 Stopper As . |
| - | - | - | Minimum end play of the shaft in axial direction is 0.25 mm (0.010 inch). Maximum end play of the shaft in axial direction is 1.23 mm (0.048 inch). |
Caterpillar Information System:
572R Series II Pipelayer Hydraulic System Hydraulic Tank and Filter
The Hoses that connect to the Brake Reservoir are Too Long{4269} The Hoses that connect to the Brake Reservoir are Too Long{4269}
450E Backhoe Loader Transmission Magnetic Screen - Clean
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
450E Backhoe Loader Transmission Oil Sample - Obtain
2006/11/27 An Improved Elbow and a Tube for the Coolant Lines Is Used {1380}
450E Backhoe Loader Transmission Oil Level - Check
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Install
C175-16 Locomotive Engine Valve Lash - Adjust
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Remove
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
AccuGrade® GPS System Components
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Remove
793D Off-Highway Truck/Tractor Control Valve (Hoist) - Install
450E Backhoe Loader Operator Controls
246C, 256C, 262C and 272C Skid Steer Loaders Fire Extinguisher Location
450E Backhoe Loader Joystick Control - Backhoe
450E Backhoe Loader Backhoe Four Lever Control - If Equipped
Load Haul Dump Machine Machining & Welding Information Consumables
Load Haul Dump Machine Machining & Welding Information Rear Frame
Load Haul Dump Machine Machining & Welding Information Front Frame
Load Haul Dump Machine Machining & Welding Information Cab Mounting
2006/07/24 Correction to Disassembly and Assembly , "Axle Housing (Service Brakes, Differential, and Bevel Gear) - Assemble" {3256, 3258, 3260, 4251}
450E Backhoe Loader Swing Frame and Cylinder Bearings - Lubricate