Transmission Hydraulic Control - Install
安装步骤
- 安装歧管 (40) 、O 形密封圈 (42) （图上未显示）和螺栓 (41) 。 拧紧螺栓 (41) 至扭矩为 48 ± 4 N·m (35 ± 3 lb ft)。
Show/hide table
 | |
| 图 1 | g01290113 |
- 安装歧管 (43) 和螺栓 (45) 。 拧紧螺栓 (45) 至扭矩为 48 ± 4 N·m (35 ± 3 lb ft)。
- 安装盘 (46) 和螺栓 (47) 。 拧紧螺栓 (47) 至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
- 安装弯管 (38) 和螺栓 (39) 。 拧紧螺栓 (39) 至扭矩为 48 ± 4 N·m (35 ± 3 lb ft)。 安装护圈 (37) 。
Show/hide table
 | |
| 图 2 | g01289224 |
- 安装阀总成 (36) 。 阀总成 (36) 的重量约为 27 kg (60 lb)。 安装螺栓 (35) 。 拧紧螺栓 (35) 至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
Show/hide table
 | |
| 图 3 | g01289223 |
- 安装阀总成 (34) 。 安装盘 (33) 。 安装螺栓 (31) 和螺栓 (32) 。 拧紧螺栓 (31) 至扭矩为 48 ± 4 N·m (35 ± 3 lb ft)。 拧紧螺栓 (32) 至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
Show/hide table
 | |
| 图 4 | g01289212 |
- 安装盖 (10) 和密封垫。 安装夹子 (28) 和 (30) 。 安装隔套 (29) 。
Show/hide table
 | |
| 图 5 | g01289211 |
- 安装联轴节组件 (25) 。 将 O 形密封圈安装到套筒 (23) 和 (24) 上。 安装套筒 (23) 和 (24) 。 安装 O 形密封圈 (26) 和 O 形密封圈 (27) 。
Show/hide table
 | |
| 图 6 | g01289209 |
- 安装阀 (21) 和螺栓 (22) 。 拧紧螺栓 (22) 至扭矩为 48 ± 4 N·m (35 ± 3 lb ft)。
Show/hide table
 | |
| 图 7 | g01289208 |
- 连接盘 (16) 和角板 (15) 。 连接软管组件 (18) 和 (19) 。 连接线束组件 (20) 。
Show/hide table
 | |
| 图 8 | g01289207 |
- 安装支架 (12) 。 连接软管组件 (13) 和线束组件 (14) 。 连接线束组件 (11) 。
Show/hide table
 | |
| 图 9 | g01289205 |
- 将盘 (6) 连接在盖 (10) 上。 连接软管组件 (3) 、线束组件 (4) 和线束组件 (5) 。
Show/hide table
 | |
| 图 10 | g01289204 |
- 将支架 (9) 连接在盖 (10) 上。 安装夹子 (7) 。 连接线束组件 (8) 。
- 安装防护罩 (1) 和 (2) 。
Show/hide table
 | |
| 图 11 | g01289200 |
Caterpillar Information System:
657G Wheel Tractor-Scraper Wheel Tractor Power Train Transmission Hydraulic Control - Remove
Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051} Effectivity of the Upgrades to Remanufactured Transmissions, Torque Converters, and Wheel Assemblies{3030, 3101, 4051}
D7G Series 2 and D7G Series II Track-Type Tractors Capacities (Refill)
D7G Series 2 and D7G Series II Track-Type Tractors Additional Messages
657G Wheel Tractor-Scraper Engine Supplement Transmission Oil Cooler - Remove and Install
966H and 972H Wheel Loaders Drive Shaft Universal Joints - Lubricate
966H and 972H Wheel Loaders Drive Shaft Support Bearing - Lubricate
D7G Series 2 and D7G Series II Track-Type Tractors Lifting and Tying Down the Machine
2006/08/07 A New Kit for the Cooling System Pressure Cap is Available {1353, 1354, 1382, 1392, 7405}
657G Wheel Tractor-Scraper Engine Supplement Engine Support (Rear) - Remove and Install
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Top End)
3508B, 3512B, and 3516B High Displacement Generator Sets Overhaul (Major)
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Braking System Brake Accumulator
D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Water and Sediment - Drain
953D Track-Type Loader Machine Systems Cab - Remove
953D Track-Type Loader Machine Systems Cab - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Power Train Guard (Transmission) - Remove and Install
Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300} Installation Instructions for the 291-1184 Secondary Steering Group (Kit) {4300}
D7G Series 2 and D7G Series II Track-Type Tractors Fuel Tank Cap and Strainer - Clean
D7G Series 2 and D7G Series II Track-Type Tractors Emissions Certification Film
D7G Series 2 and D7G Series II Track-Type Tractors Condenser (Refrigerant) - Clean
Underground Articulated Trucks Truck Payload Measurement System Service Tools
2006/07/31 Bearing Inserts Are Now Used in Frame Steering Bracket {7051, 7073}
657G Wheel Scraper Power Train Power Train Guard (Transmission) - Remove and Install