Retarder and Transfer Gear - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件名称     | 数量     |
A     | 138-7574     | 连杆支架     | 1     |
- 将工具 (A) 和适当的起吊设备连接在分动器总成 (16) 上。 分动器总成 (16) 的重量约为 376 kg (830 lb)。 安装 O 形密封圈 (18) (图上未显示)。 安置分动器总成 (16) ,安装螺栓 (17) 。
Show/hide table
图 1 | g01282936 |
- 连接软管组件 (14) 。 安装夹子 (15) 。 连接软管组件 (13) 。
- 连接软管组件 (12) 、 (9) 和 (10) 。 连接线束组件 (11) 。
Show/hide table
图 2 | g01282935 |
- 安置管组件 (6) 。 管组件 (6) 的重量约为 23 kg (50 lb)。 安装螺栓 (7) 。
Show/hide table
图 3 | g01282934 |
- 安装弯管 (8) 。 安装防护罩组件 (4) 。 连接软管组件 (3) 和 (5) 。
- 安装弯管 (1) 。 连接夹子 (2) 。
Show/hide table
图 4 | g01282933 |
End By:
- 安装后护罩。 请参阅 拆解和组装, "护罩 - 拆卸和安装"。
- 安装机具泵。 请参阅 拆解和组装, "液压和转向系统齿轮泵 - 安装"。
Caterpillar Information System:
657G Wheel Tractor-Scraper Machine Systems Window Wiper and Wiper Motor - Remove and Install
D6N Track-Type Tractor Machine Systems Radiator Guard and Support
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Remove
3500 Generator Sets Overhaul Considerations
D6G Series 2 Track-Type Tractor Bulldozer Tilt Brace - Lubricate - If Equipped
D6N Track-Type Tractor Hydraulic System Bulldozer Brace
D6G Series 2 Track-Type Tractor Additional Messages
953D Track-Type Loader Machine Systems Fuel Tank - Install
3176C Engines for Caterpillar Built Machines Sensors and Electrical Connectors
657G Wheel Tractor-Scraper Machine Systems Heater Coil - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Evaporator Coil - Remove and Install
953D Track-Type Loader Machine Systems Fuel Tank - Remove
657G Wheel Tractor-Scraper Machine Systems Seat - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Seat Suspension - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Steering Control - Remove and Install
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Disassemble
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Assemble
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)
657G Wheel Tractor-Scraper Machine Systems Air Conditioner and Mounting - Remove and Install
Operation of the Electrohydraulic Control for the Modified 824H Scoop{5702, 5705} Operation of the Electrohydraulic Control for the Modified 824H Scoop{5702, 5705}
2006/07/10 New Tightening Specifications For Precleaner Assembly {1055}
525C, 535C and 545C Wheel Skidders Power Train Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
2008/06/09 Adjustment Procedure for Bucket Stops on Dealer Installed Buckets or for Reducing Bucket Movement and Material Spillage {6001, 6107, 6119}
657G Wheel Tractor-Scraper Machine Systems Joystick Control - Remove and Install