Magnetic Switch
Show/hide table
 | |
| Illustration 1 | g01276080 |
(1) Nut
- Torque ... 5.5 ± 0.5 N·m (49.00 ± 4.00 lb in)
(2) Plug with socket (3) and pin (4).
Operating temperature range ... −60 to 121 °C (−76 to 250 °F)
System voltage ... 24 VDC
Pull-in voltage at 25°C (77°F) ... 16 V max
Hold-in voltage at 25°C (77°F) ... 8 V max
Coil resistance at 20 °C (68 °F) ... 27.5 ± 0.28 Ohms
Maximum current draw ... 1.25 Amp
Contacts ... Normally open
Caterpillar Information System:
3508 EUI Engine for Off-Highway Truck/Tractors Engine Speed Sensor
Starting and Charging Systems Batteries Test Description
3512C Engine for 785D Off-Highway Truck/Tractors Camshaft
Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057} Field Installation of the 266-2410 Backhoe Auxiliary Lines Gp (Kit) for 420E Backhoes with an Extendable Stick{5057}
3176C Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Inlet Pressure Sensor
2006/06/19 Check the Alignment on the Alternator {1425}
Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077} Field Installation of the 264-0187 Ride Control Installation Gp {1408, 5004, 5057, 5077}
3508 EUI Engine for Off-Highway Truck/Tractors Turbocharger Outlet Pressure Sensor
3176C Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
3508 EUI Engine for Off-Highway Truck/Tractors Engine Oil Pressure Sensor
Starting and Charging Systems Starter Ground Circuit Test Description
Starting and Charging Systems Alternator Breaker Test Description
Starting and Charging Systems Key Breaker Test Description
3508 EUI Engine for Off-Highway Truck/Tractors Temperature Switch
2006/06/05 An Optional Cover for the Sight Gauges On the Torque Converter Group Is Available {3101}
Starting and Charging Systems Key Start Switch Test Description
How to Avoid Timestamp Problems with VIMS Advisor{7601} How to Avoid Timestamp Problems with VIMS Advisor{7601}
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Remove
572R Series II Pipelayer Fast Fill Fuel Adapter
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Mixing Chamber - Install
572R Series II Pipelayer Fast Fill Fuel Adapter
Procedure to Fill Gear Pump with Oil Before Start-Up{5073} Procedure to Fill Gear Pump with Oil Before Start-Up{5073}
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Brake Electronic Control System MID 116 - CID 0713 - FMI 04