 | |
| Illustration 1 | g01344725 |
Static Switch Left Panel (1) Fan Fuses F1-F3 (2) Fuse Block F23, F24 (3) Zig-Zag Circuit Breaker K13 (4) Zig-Zag Overload Relay K11 (5) Zig-Zag Transformer | |
The Static Switch Cabinet contains the control power fuses for the power coming to the Static Switch Cabinet. The left panel of the cabinet holds one two-fuse block. Additionally, there are seven fuses at the bottom of the cabinet. Refer to Illustration 1 for the location of the left panel in the cabinet.
 | |
| Illustration 2 | g01275357 |
Bottom Panel Fuse Location (Static Switch Cabinet) (6) Fuse Block, F4-F6, F13-F16 | |
Refer to Illustration 2 for the locations of the fuses at the bottom of the cabinet. Refer to Illustration 1 for the location of the fuses on the left panel. Refer to Illustration 3 for specific fuse locations.
There is also a set of fuses for the three fans in the system. These fuses are located on the left panel above the System Fuse Block for F23 and F24. Refer to Illustration 1 for the fan fuse location.
| Static Switch Cabinet System Fuses | ||
|---|---|---|
| Fuse | Amperes | Protects |
| F4 | 1 | HVI Output Voltage Phase A (J6-11) |
| F5 | 1 | HVI Output Voltage Phase B (J6-4) |
| F6 | 1 | HVI Output Voltage Phase C (J6-7) |
| F13 | 2.5 | T3 Transformer in the Controls cabinet |
| F14 | 2.5 | T3 Transformer in the Controls cabinet |
| F15 | 2.5 | T4 Transformer in the Controls cabinet |
| F16 | 2.5 | T4 Transformer in the Controls cabinet |
| F23 | 10 | T5 Secondary - Static Switch Fans and Fan Fuse Block |
| F24 | 10 | T5 Secondary - BCS (J4-1 via SW1) 230V Control Power in CC |
| Static Switch Cabinet Fan Fuses | ||
|---|---|---|
| Fuse | Type | Protects |
| F1 | SLO BLO, 3.15 AMPS, 1500A | Fan 1 (Left) |
| F2 | SLO BLO, 3.15 AMPS, 1500A | Fan 2 (Middle) |
| F3 | SLO BLO, 3.15 AMPS, 1500A | Fan 3 (Right) |
 | |
| Illustration 3 | g01275420 |