Modem - Configure
Note: The modem is a purchased option.
- Connect a computer equipped with UPSView to the board for the parallel cabinet interface (PCI) terminal "J6" in the system cabinet.
- Boot up the computer and execute UPSView application.
- Select "Connection" drop-down menu and select "Connect".
Show/hide table
Illustration 1 g03420642 - UPSView Connect Select "Enter Password" menu option in order to view the "Enter User Name / Password" dialog box.
Show/hide table
Illustration 2 g01273854 Enter Password - Enter a valid "User Name" and "Password".
Note: A "User Name" and a "Password" are required from Active Power to enable the modem. Contact Caterpillar technical support for more information.
- Select the "Op. Params" drop-down menu.
Show/hide table
Illustration 3 g01273856 "Op Params" - Select "Op. Group 5: Internal CAN Enable, Modem Enable" from the "Op. Params." drop-down menu.
Show/hide table
Illustration 4 g01273859 Modem Enable - Set the "Enter new valve for Modem Enable" to "1" and press "Send".
Show/hide table
Illustration 5 g01273861 "Parameter Change" - Select the "Op. Group 5: Internal CAN Enable, Modem Type" from the "Op. Params." drop-down menu.
Show/hide table
Illustration 6 g01273862 "Modem type" - Select the type of the modem that is being installed from the following list.
Show/hide table
Table 1 Types of Modems 2 3 Com Courier V. Everything External 4 Zoom - Select "Enter new value for Modem Type" (2) for 3 COM Courier V or select "Zoom " (4). Press "Send".
Show/hide table
Illustration 7 g01273863 Send - Press "Control Q" on the PC key board in order to initialize the modem. Press "Y" in order to acknowledge the modem.
The configuration of the modem is complete.
Show/hide tableIllustration 8 g01273864 Dip switches for only the 3COM "Courier V. Everything" modem
(1) Modem dip switches - Turn the modem over and set the DIP switches (1) to match the values listed in Table 2.
Show/hide table
Switch settings for the 3 Com Courier V. Everything Modem | |
Switch | Position |
1 | On ("DTR Always On") |
2 | On ("Numeric Result Codes") |
3 | On ("Display Result Codes") |
4 | On ("No Echo Offline Commands") |
5 | Off ("Auto Answer on Ring") |
6 | Off ("Normal Carrier Detect") |
7 | Off ("Display All Result Codes") |
8 | On ("Enable AT Command Set") |
9 | Off ("Disconnect with +++") |
10 | Off ("Load NVRAM Defaults") |
Caterpillar Information System:
C4.4 Industrial Engine Crankshaft Pulley - Check
C4.4 Industrial Engine Alternator - Test
2006/05/22 Revised Product Support Update {0374}
TA22-4WD Agricultural Transmission Capacities (Refill)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Circuit Breaker (Maintenance Bypass Cabinet)
C9 Engine for Caterpillar Built Machines Camshaft - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Remote Notification - Setup
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Emergency Power Off - Reset
C9 Engine for Caterpillar Built Machines Camshaft - Remove
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Cable Landing (Maintenance Bypass Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission Oil Sample - Obtain
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Transformer (Maintenance Bypass Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Input/Output Cabinet)
C4.4 Industrial Engine V-Belt - Test
797B Off-Highway Truck Steering System Steering Accumulator - Test and Charge
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Log File - Retrieve
CX35 On-Highway Transmission Lubricant Viscosities
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Firmware - Update
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Personal Computer to UPS Connection
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Input/Output Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Fuse (Input/Output Cabinet)
797F Off-Highway Truck Steering System Steering Accumulator
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Reset Pushbutton
C11 and C13 Petroleum Engines Fuel System Secondary Filter - Replace