24V Power Supply (MMS System Cabinet)
Show/hide table
Illustration 1 | g01273665 |
(1) 24 VDC Power Supplies |
The two 24 VDC power supplies (1) are located on the left panel of the MMS system cabinet. The 24 VDC power supplies (1) are used to power all the circuit boards in the system.
Refer to Systems Operation, Testing and Adjusting, RENR9988, "Internal Component Preremoval Steps (MMS System Cabinet)" in order to shut down the system and gain access to internal components.
- Remove the eight wires that connect to the power supply. The wires have a labeling as the location of the wire. Verify each labeling on the wire with the location of the wire. Refer to Illustration 2 for wire connections.
- Remove the two screws that attach the power supply to the left panel.
- Remove the power supply from the cabinet.
Show/hide table
Illustration 2 | g01273672 |
Wire Connections for the Power Supply |
- Position the power supply on the left panel. Refer to Illustration 1 for the position of the power supply.
- Attach the power supply to the left panel with the two screws.
- Attach the eight wires to the power supply. Refer to Illustration 2 for wire connections.
Caterpillar Information System:
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Transformer (T1 to T3)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System I/O Daughter PWA (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System I/O PWA (MMS System Cabinet)
C15 and C18 Petroleum Generator Sets Fuel System Primary Filter (Water Separator) Element - Replace
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Rotor Position Sensor - Adjust
TA22-4WD Agricultural Transmission Lifting and Tying Down the Transmission
C4.4 Industrial Engine Flywheel Housing - Inspect
C13 and C15 On-highway Engines Data Link - Test
C4.4 Industrial Engine Flywheel - Inspect
UPS Firmware Enhancement for Monitoring Bearing Serviceability{4480, 7551, 7620} UPS Firmware Enhancement for Monitoring Bearing Serviceability{4480, 7551, 7620}
C4.4 Industrial Engine Gear Group - Inspect
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Bypass Pushbutton
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Current Transformers (Primary, Secondary)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Fan (MMS System Cabinet)
C13 and C15 On-Highway Engines Engine Oil Level Gauge - Calibrate
TA22-4WD Agricultural Transmission Transmission Control
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Circuit Breaker (K3)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies MOV Surge Protector
TA22-4WD Agricultural Transmission Specifications
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modem (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bypass Static Switch (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Transformer (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Contactor (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Controller PWA (MMS System Cabinet)