Wiring for the Coolant Level Switches and the Coolant Level Sensors {7422}
- Engine:
- 3508B (S/N: S2A1-UP; S2B1-UP; S2D1-UP; S2E1-UP; S2F1-UP)
- 3512B (S/N: MRG1-UP; S2G1-UP; MKH1-UP; S2H1-UP; S2J1-UP; S2K1-UP; S2L1-UP; S2M1-UP; S2N1-UP)
- 3516B (S/N: B5G1-UP; PAG1-UP; S2P1-UP; S2R1-UP; S2S1-UP; S2T1-UP; S2W1-UP; S2X1-UP; S2Y1-UP; S2Z1-UP)
The engine can have either switches or sensors in order to monitor the coolant level. The sensors or switches are wired to the "A-C48" customer connector.
The following schematics are for the engines that are listed above.
- Illustration 1 is for the coolant level sensor for the cylinder block (jacket water).
- Illustration 2 is for the coolant level sensor for the Separate Circuit Aftercooler (SCAC).
- Illustration 3 is for the coolant level switches for both the cylinder block and for the SCAC coolant.
Show/hide table
Illustration 1 | g01279231 |
Wiring for the coolant level sensor for the cylinder block |
Show/hide table
Illustration 2 | g01279233 |
Wiring for the coolant level sensor for the separate circuit aftercooler |
Show/hide table
Illustration 3 | g01279236 |
Wiring for the coolant level switches |
Caterpillar Information System:
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Output Current - Calibrate
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Door Latch
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Door Pull and Retaining Ring
C280 Marine Auxiliary Engines System Overview
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Door
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (Cabinet Hardware)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Transmission - Assemble
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys External Source Sync PWA (4 Wire Transformer Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Fan (4 Wire Transformer Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys UPS View Commands and Hot Keys
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Flywheel Messages
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Graphical User Interface Messages
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys General Information (Maintenance Bypass Cabinet)
C7 and C9 On-highway Engines Engine Oil and Filter - Change
2006/05/29 New Cylinder Head Groups are Used {1100}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel Field Coil Current - Calibrate
TA22-4WD Agricultural Transmission Breather (Transmission) - Clean
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel Telemetry - Calibrate
C7 and C9 On-highway Engines Engine Oil Level Gauge - Calibrate
3408E and 3412E Industrial Engines Piston and Rings
3408E and 3412E Industrial Engines Piston and Rings
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Internal Component Preremoval Steps (Maintenance Bypass Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys System Fuse (Maintenance Bypass Cabinet)
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Bypass Pushbutton