Gen Set Module Circuit Breaker
Show/hide table
Illustration 1 | g01270565 |
SMS Bypass Cabinet (1) GSM Circuit Breaker |
The Genset Module Start Option adds the following breakers to the Bypass cabinet:
- one breaker
- two breakers (K6 and K7)
The breakers are located on the front panel at the bottom of the cabinet behind the door. Refer to Illustration 1 for the location. The GSM Start Option allows the UPS to control generators in cases of lost utility power. Also, the GSM Start Option allows the UPS to start the external Genset if power is lost.
Refer to the following list of characteristics for the circuit breakers:
- 480 VAC
- 40 Amperes
- 3-pole
Refer to Systems Operation, Testing and Adjusting, RENR9988, "Internal Component Preremoval Steps (SMS Bypass Cabinet)" in order to shut down the system and gain access to internal components.
- Disconnect the six wires that lead to the circuit breaker (1) and from the circuit breaker (1). Verify the labeling on the cables for subsequent installation.
- Remove the four screws on the front of the breaker (1) that secure the breaker (1) to the rear of the cabinet.
- Attach the GSM Circuit Breaker (1) to the panel of the cabinet with four screws. Refer to Illustration 2.
Show/hide table
Illustration 3 g01270572 Wire Connections for the GSM - Connect the wires from the cable landing and the Genset. Verify the labeling of the wires with the location of the wires. Refer to Illustration 3 for wire connections.
Show/hide table
Illustration 2 | g01270570 |
GSM Panel (2) GSM Breaker 1 (3) GSM Breaker 2 |
Caterpillar Information System:
Dealer Inventory of UPS Flywheel Bearings{4480, 7551} Dealer Inventory of UPS Flywheel Bearings{4480, 7551}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Zig Zag Thyristor (SMS Bypass Cabinet)
3500 Generator Set Engines Engine Oil Temperature Sensor - Resistive Temperature Device
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel Bearing - Replace
3500 Generator Set Engines Engine Oil Pressure Sensor
3408C and 3412C Marine Engines Crankshaft
3044C Industrial Engine Engine Air Cleaner Element (Dual Element) - Clean/Replace
3044C Industrial Engine Engine Mounts - Inspect
3500 Generator Set Engines Engine Coolant Temperature Sensor - Resistive Temperature Device
3044C Industrial Engine Water Pump - Inspect
3500C Marine Engines Air Cleaner
C175-16 Locomotive Engine Exhaust Fitting
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modem (SMS Bypass Cabinet)
2006/05/15 New Crankshaft Front Seal {1160}
C4.4 Industrial Engine Fuel System - Prime
3412E and C30 Marine Engines Cooling System Coolant Level - Check
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Bringing UPS Online
TH48-E70 Petroleum Transmission Plate Locations and Film Locations
2006/07/10 New Parts are Available for Engines that use Heavy Duty Air Cleaners {1051, 1316, 1317}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Internal Component Preremoval Steps (Input/Output Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies System Fuse (Input/Output Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Fan Transformer
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Isolation Switches
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Fan (Input/Output Cabinet)