Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Input Speed Sensor
- Disconnect harness assembly (1). Remove bolt (3) and speed sensor (2) .
Output Speed Sensors
- Disconnect harness assembly (2). Remove bolt (4) and speed sensor (1). Repeat for the remaining speed sensor (3) .