Clutch (Front Wheel Assist) - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Brackets     | 2     |
Start By:
- Remove the speed sensor for the front wheel assist. Refer to Disassembly and Assembly, "Speed Sensor for the Front Wheel Assist (Transmission) - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove the guard.
- Remove tube assemblies (4). Disconnect harness assembly (1). Remove bolts (3) and modulating control valve (2) .
Show/hide table
Illustration 1 | g01267705 |
- Attach Tooling (A) and a suitable lifting device to clutch assembly (5). The weight of clutch assembly (5) is approximately 70 kg (150 lb). Remove bolts (6) and clutch assembly (5). Remove O-ring (7) .
Show/hide table
Illustration 2 | g01267706 |
Caterpillar Information System:
C15 On-Highway Engine Crankshaft Position Sensor - Remove and Install
C15 On-Highway Engine Camshaft Position Sensor - Remove and Install
C15 On-Highway Engine Fuel Temperature Sensor - Remove and Install
3044C Industrial Engine Product Lifting
C13 On-highway Engine Cylinder Block
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel Load Cell - Calibrate
336E Excavator Machine System Specifications Sprocket
2006/05/15 A New Air Lines Group is Used {1071}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050} Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Specifications
C13 On-highway Engine Engine Oil Pan
2007/04/09 Improved Battery Chargers For Gensets are Available {1406}
3500B Industrial Engines with the ADEM 3 Electronic Control Module Prelubrication System
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Hardware Revision - Version 3.0 Design
C15 On-Highway Engine Engine Oil Pressure Sensor - Remove and Install - Variable Intake Valve Actuator
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (SMS Bypass Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (Input/Output Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist) - Install
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (MMS System Cabinet)
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies General Information (Flywheel Cabinet)
TA19-M2WD and TA19-M4WD Agricultural Transmissions Clutch (Front Wheel Assist) - Disassemble
TH48-E70 Petroleum Transmission Capacities (Refill)
3500B Industrial Engines with the ADEM 3 Electronic Control Module Pulse Width Modulated Sensor
C175 Generator Sets Fan Drive Bearing - Lubricate